Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 2AR-FE)
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0050515 COMPRESSOR(for 2AR-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 2AR-FE)  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 88703 3.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

a.
E269092

Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.


b.

Remove the O-ring from the discharge hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88704 4.DISCONNECT SUCTION HOSE SUB-ASSEMBLY

a.
E269093

Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.


b.

Remove the O-ring from the suction hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88310 5.REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

a.
E269098

w/ Pulley:

Disconnect the connector.


b.

w/ Pulley:

Remove the bolt and disconnect the wire harness bracket.


c.
E269097

w/ Magnet Clutch:

Detach the 2 harness clamps and disconnect the 2 connectors.


d.
E269102

Remove the 2 bolts and 2 nuts.


e.

Using an E8 ''TORX'' socket wrench, remove the 2 stud bolts and compressor assembly with pulley.