Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › STEERING PAD(for Single Type)
RM3090E _58 Vehicle Interior _008786 SUPPLEMENTAL RESTRAINT SYSTEMS _0050503 STEERING PAD(for Single Type) G

SUPPLEMENTAL RESTRAINT SYSTEMS  STEERING PAD(for Single Type)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the steering pad.


PROCEDURE

Hide 45130 1.INSPECT STEERING PAD (for Vehicle not Involved in Collision)


b.

Visually check for defects with the steering pad installed on the vehicle.

i.

The defects are as follows:

·

Cuts on the surface and in the grooves of the steering pad

·

Small cracks on the surface and in the grooves of the steering pad

·

Significant discoloration on the surface and in the grooves of the steering pad


OK:

No defects are found.


HINT:

If any of the defects is found, replace the steering pad with a new one.




Hide 45130 2.INSPECT STEERING PAD (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the steering pad removed from the vehicle.

i.

The defects are as follows:

·

Cuts on the surface and in the grooves of the steering pad

·

Small cracks on the surface and in the grooves of the steering pad

·

Significant discoloration on the surface and in the grooves of the steering pad

·

Cracks or other damage to the connector

·

Deformation of the steering wheel assembly

·

Deformation of the horn button contact plate of the steering pad

·

Interference or uneven clearance between the steering pad and steering wheel assembly when the new steering pad is installed on the steering wheel assembly


OK:

No defects are found.


HINT:

If any of the defects is found, replace the steering pad or steering wheel assembly with a new one.