Home › Vehicle Interior › SEAT › FRONT SEATBACK HEATER(for Power Seat)
RM3090E _58 Vehicle Interior _008433 SEAT _0050548 FRONT SEATBACK HEATER(for Power Seat) G

SEAT  FRONT SEATBACK HEATER(for Power Seat)  INSPECTION  


PROCEDURE

Hide 87510N 1.INSPECT FRONT SEATBACK HEATER ASSEMBLY LH (for LHD)

B341144
0.5,0.344 0.813,0.5 0.313,0.156 10 *a
*a Component without harness connected
(Front Seatback Heater Assembly LH)


a.

Check the front seatback heater assembly LH.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Seatback heater temperature 20°C (68°F) 1.68 to 1.72 Ω
1 - 3 Seatback heater temperature 20°C (68°F) 4.22 to 4.30 Ω


If the result is not as specified, replace the front seatback heater assembly LH.



Hide 87510M 2.INSPECT FRONT SEATBACK HEATER ASSEMBLY RH (for RHD)

B341144
0.5,0.344 0.813,0.5 0.313,0.156 10 *a
*a Component without harness connected
(Front Seatback Heater Assembly RH)


a.

Check the front seatback heater assembly RH.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Seatback heater temperature 20°C (68°F) 1.68 to 1.72 Ω
1 - 3 Seatback heater temperature 20°C (68°F) 4.22 to 4.30 Ω


If the result is not as specified, replace the front seatback heater assembly RH.