Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT SEAT SIDE AIRBAG ASSEMBLY(for Power Seat)
RM3090E _58 Vehicle Interior _008786 SUPPLEMENTAL RESTRAINT SYSTEMS _0050514 FRONT SEAT SIDE AIRBAG ASSEMBLY(for Power Seat) G

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT SEAT SIDE AIRBAG ASSEMBLY(for Power Seat)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the front seat airbag assemblies.


PROCEDURE

Hide 73920A 1.INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


b.

Visually check for defects with the front seat airbag assemblies installed on the vehicle.

i.

The defects are as follows:

·

Cuts on the front seatback assembly around the front seat airbag assemblies

·

Small cracks on the front seatback assembly around the front seat airbag assemblies

·

Significant discoloration on the front seatback assembly around the front seat airbag assemblies


OK:

No defects are found.


HINT:

If any of the defects is found, replace the separate type front seatback cover or separate type front seatback pad with a new one.




Hide 73920A 2.INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the front seat airbag assemblies removed from the vehicle.

i.

The defects are as follows:

·

Make sure that there are no scratches, broken or frayed threads on the surface of the base fabric of the front seat airbag assemblies

·

Marks from being dropped

·

Deformation on the installation part of the front seat airbag assemblies

·

Cracks or other damage to the wire harness or connector


OK:

No defects are found.


HINT:

If any of the defects is found, replace the front seat airbag assembly with a new one.