53510
1.INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
| *1 | Open |
| *2 | Lock |
| *a | Component without harness connected
Hood Lock Assembly (Engine Hood Courtesy Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Opened | 10 kΩ or higher |
| 1 - 2 | Locked | Below 1 Ω |
If the result is not as specified, replace the hood lock assembly (engine hood courtesy switch).