Home › Drivetrain › EB63 MANUAL TRANSMISSION / TRANSAXLE › SHIFT AND SELECT LEVER SHAFT
RM3090E _52 Drivetrain _009272 EB63 MANUAL TRANSMISSION / TRANSAXLE _0050735 SHIFT AND SELECT LEVER SHAFT A

EB63 MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT LEVER SHAFT  REASSEMBLY  


PROCEDURE

Hide 33237 1.INSTALL RELEASE HEAD

a.

Install the release head to the shift and select lever shaft.


b.
C204828
2.458,1.021 2.698,1.24 0.24,0.219 10 *a
*a Depth


Using a 5 mm pin punch and hammer, tap in the slotted spring pin to the shift and select lever shaft.

Standard depth:

-0.2 to 0.8 mm (-0.00787 to 0.0315 in.)


NOTICE:

Make sure the installation direction is correct.



Hide 33926 2.INSTALL FRONT INNER SHIFT LEVER

a.

Install the front inner shift lever to the shift and select lever shaft.


b.
C200230
2.271,0.219 2.594,0.427 0.323,0.208 10 *a
*a Depth


Using a 5 mm pin punch and hammer, tap in the front inner shift lever and slotted spring pin to the shift and select lever shaft.

Standard depth:

-0.2 to 0.8 mm (-0.00787 to 0.0315 in.)


NOTICE:

Make sure the installation direction is correct.



Hide 33252A 3.INSTALL INNER NO. 2 SHIFT LEVER

a.

Install the inner No. 2 shift lever to the shift and select lever shaft.


b.
C204829
1.604,0.948 1.865,1.156 0.26,0.208 10 *a
*a Depth


Using a 5 mm pin punch and hammer, tap in the inner No. 2 shift lever and slotted spring pin to the shift and select lever shaft.

Standard depth:

0 to 0.6 mm (0 to 0.0236 in.)


NOTICE:

Make sure the installation direction is correct.