Home › Drivetrain › EB63F MANUAL TRANSMISSION / TRANSAXLE › SHIFT LEVER ASSEMBLY
RM3090E _52 Drivetrain _009273 EB63F MANUAL TRANSMISSION / TRANSAXLE _0050741 SHIFT LEVER ASSEMBLY A

EB63F MANUAL TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 33530F 1.INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY

a.

Install the floor shift shift lever assembly with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


b.

for LHD:

i.

Attach the 2 wire harness clamps.



c.

for RHD:

i.

Attach the 3 wire harness clamps.



Hide 33820B 2.CONNECT TRANSAXLE CONTROL CABLE ASSEMBLY

Hide 33820B 3.ADJUST TRANSAXLE CONTROL CABLE ASSEMBLY


b.

For new shift lever:

Remove the stopper pin and dispose of it.


Hide 58901A 4.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY