Home › Drivetrain › EB63F MANUAL TRANSMISSION / TRANSAXLE › OUTPUT SHAFT
RM3090E _52 Drivetrain _009273 EB63F MANUAL TRANSMISSION / TRANSAXLE _0050746 OUTPUT SHAFT A

EB63F MANUAL TRANSMISSION / TRANSAXLE  OUTPUT SHAFT  DISASSEMBLY  


PROCEDURE

Hide 1.INSPECT 1ST GEAR THRUST CLEARANCE

Hide 2.INSPECT 2ND GEAR THRUST CLEARANCE

Hide 3.INSPECT 1ST GEAR RADIAL CLEARANCE

Hide 4.INSPECT 2ND GEAR RADIAL CLEARANCE

Hide 33429B 5.REMOVE 6TH DRIVEN GEAR

a.
C278734C01
0.698,1.698 0.698,1.167 0.698,1.167 0.531,1.167 false 0.354,2.823 0.354,2.531 0.354,2.531 0.552,2.302 false 1.208,0.542 1.438,0.729 0.229,0.188 10 *a 0.104,2.083 0.333,2.271 0.229,0.188 10 *b 0.208,1.094 0.615,1.271 0.406,0.177 10 SST 0.219,2.917 0.625,3.094 0.406,0.177 10 SST
*a Turn
*b Hold


Using SST, remove the rear output shaft bearing and 6th driven gear from the output shaft.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04021, 09957-04010, 09958-04011)
09950-60010  (09951-00180, 09951-00270, 09952-06010)


Hide 33431C 6.REMOVE OUTPUT GEAR SPACER

a.
C199106

Remove the output gear spacer from the output shaft.


Hide 33422B 7.REMOVE 4TH DRIVEN GEAR

a.
C199107
1.874,0.449 2.169,0.602 0.295,0.153 10 SST 2.512,0.525 2.225,0.525 false 2.47,0.693 2.336,0.693 false 2.336,0.693 2.336,0.525 false 1.851,0.981 2.146,1.135 0.295,0.153 10 SST 2.961,0.971 3.256,1.125 0.295,0.153 10 SST 2.218,1.073 2.347,1.073 false 2.347,1.073 2.347,1.131 false 2.347,1.131 2.192,1.472 false 2.94,1.06 2.83,1.06 false 2.83,1.06 2.83,1.151 false 2.83,1.151 2.933,1.472 false

Using SST and a press, press out the 5th driven gear and 4th driven gear from the output shaft.

SST
09527-10011  
09950-40011  (09957-04010)
09950-60010  (09951-00180, 09951-00270, 09952-06010)

NOTICE:

Support the output shaft by hand to prevent it from falling.



Hide 33431C 8.REMOVE OUTPUT GEAR SPACER

a.
C199108

Remove the output gear spacer from the output shaft.


Hide 33332 9.REMOVE 2ND GEAR

a.
C278739C01
0.635,1.344 0.635,0.667 0.635,0.667 0.469,0.667 false 1.469,0.719 1.781,0.917 0.313,0.198 10 *a 0.177,1.771 0.49,1.969 0.313,0.198 10 *b 0.156,0.594 0.51,0.802 0.354,0.208 10 SST
*a Turn
*b Hold


Using SST, remove the 3rd driven gear and 2nd gear from the output shaft.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04020, 09954-04030, 09955-04021, 09957-04010, 09958-04011)
09950-60010  (09951-00180, 09951-00270, 09952-06010)


Hide 33332B 10.REMOVE 2ND GEAR NEEDLE ROLLER BEARING

a.
C199110

Remove the 2nd gear needle roller bearing from the output shaft.


Hide 33356A 11.REMOVE INNER 2ND GEAR BEARING RACE

a.
C199111

Remove the inner 2nd gear bearing race from the output shaft.


Hide 33037B 12.REMOVE NO. 1 SYNCHRONIZER RING SET (for 2nd Gear)

a.
C194361C01
0.323,0.844 0.625,0.844 false 0.354,1.302 0.594,1.302 false 0.333,1.865 0.573,1.865 false 0.094,0.75 0.313,0.948 0.219,0.198 11 *1 0.094,1.219 0.271,1.406 0.177,0.188 10 *2 0.115,1.781 0.292,1.958 0.177,0.177 10 *3
*1 Inner Ring
*2 Middle Ring
*3 Outer Ring


Remove the No. 1 synchronizer ring set from the reverse gear.


Hide 33331 13.REMOVE REVERSE GEAR

a.
C278735

Remove the reverse gear from the No. 1 transmission clutch hub.


Hide 33365 14.REMOVE NO. 1 SYNCHROMESH SHIFTING KEY

a.
C199112

Remove the 3 No. 1 synchromesh shifting keys from the No. 1 transmission clutch hub.


Hide 33361 15.REMOVE NO. 1 TRANSMISSION CLUTCH HUB

a.
C199113

Remove the No. 1 transmission clutch hub from the output shaft.


Hide 33037B 16.REMOVE NO. 1 SYNCHRONIZER RING SET (for 1st Gear)

a.
C194365C01
0.292,1 0.594,1 false 0.313,1.5 0.615,1.5 false 0.323,2.031 0.625,2.031 false 0.094,0.885 0.26,1.031 0.167,0.146 10 *1 0.094,1.417 0.292,1.583 0.198,0.167 10 *2 0.125,1.958 0.292,2.135 0.167,0.177 10 *3
*1 Outer Ring
*2 Middle Ring
*3 Inner Ring


Remove the No. 1 synchronizer ring set from the 1st gear.


Hide 33335 17.REMOVE 1ST GEAR

a.
C194366

Remove the 1st gear from the output shaft.


Hide 33335C 18.REMOVE 1ST GEAR NEEDLE ROLLER BEARING

a.
C194367

Remove the 1st gear needle roller bearing from the output shaft.


Hide 33345 19.REMOVE 1ST GEAR BUSH

a.
C194368

Remove the 1st gear bush from the output shaft.


Hide 33321N 20.REMOVE FRONT OUTPUT SHAFT BEARING

a.
C278736E01
0.698,1.563 0.698,0.823 0.698,0.823 0.5,0.823 false 1.792,2.438 2.146,2.438 false 0.167,0.729 0.625,0.927 0.458,0.198 10 SST 2.229,2.375 2.688,2.573 0.458,0.198 10 SST

Using SST and a press, remove the front output shaft bearing from the output shaft.

SST
09950-00020  
09950-00030  
09950-40011  (09957-04010)
09950-60010  (09951-00180, 09951-00340, 09952-06010)