Home › Drivetrain › EB63F MANUAL TRANSMISSION / TRANSAXLE › SHIFT AND SELECT LEVER SHAFT
RM3090E _52 Drivetrain _009273 EB63F MANUAL TRANSMISSION / TRANSAXLE _0050747 SHIFT AND SELECT LEVER SHAFT A

EB63F MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT LEVER SHAFT  DISASSEMBLY  


PROCEDURE

Hide 33252A 1.REMOVE INNER NO. 2 SHIFT LEVER

a.

Secure the shift and select lever shaft assembly in a vise between aluminum plates.


b.
C204826

Using a 5 mm pin punch and hammer, tap out the slotted spring pin and remove the inner No. 2 shift lever from the shift and select lever shaft.

HINT:

Make a note of the orientation of the inner No. 2 shift lever so that it can be reinstalled in the same position.



Hide 33926 2.REMOVE FRONT INNER SHIFT LEVER

a.
C200227

Using a 5 mm pin punch and hammer, tap out the slotted spring pin from the shift and select lever shaft and remove the front inner shift lever.


Hide 33237 3.REMOVE RELEASE HEAD

a.
C204827

Using a 5 mm pin punch and hammer, tap out the slotted spring pin from the shift and select lever shaft and remove the release head.