Home › Drivetrain › EB63F MANUAL TRANSMISSION / TRANSAXLE › DIFFERENTIAL CASE › 2012.12–2014.10
RM3090E _52 Drivetrain _009273 EB63F MANUAL TRANSMISSION / TRANSAXLE _0050748 DIFFERENTIAL CASE A

EB63F MANUAL TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 41311R 1.REMOVE FRONT DIFFERENTIAL CASE OIL SEAL

a.
C204251E01
0.288,1.319 0.576,1.467 0.288,0.148 10 SST 0.686,1.41 1.214,1.41 false

Using SST, remove the front differential case oil seal from the front differential case.

SST
09308-00010  


Hide 41221 2.REMOVE FRONT DIFFERENTIAL RING GEAR

a.
C207064C01
1.99,0.49 1.208,0.167 false 1.208,0.167 0.5,0.167 false 1.927,0.667 1.208,0.167 false 0.26,0.083 0.51,0.271 0.25,0.188 10 *a
*a Matchmark


Place matchmarks on the front differential ring gear and front differential case.


b.
C199117

Remove the 12 bolts.


c.

Using a plastic-faced hammer, remove the front differential ring gear from the front differential case.


Hide 3.INSPECT FRONT DIFFERENTIAL SIDE GEAR BACKLASH

Hide 41342A 4.REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

a.
C199118E01
0.376,1.652 0.674,1.8 0.299,0.148 10 SST 0.753,1.738 0.967,1.738 false 0.966,1.74 1.119,1.111 false

Using SST and a hammer, loosen the staked part of the front differential case.

SST
09930-00010  

NOTICE:

Do not grind the tip of SST with a grinder other device.



b.
C207065

Using a 5 mm pin punch and hammer, tap out the front differential pinion shaft straight pin from the front differential case.


Hide 41342F 5.REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT

a.
C207066

Remove the front No. 1 differential pinion shaft from the front differential case.


Hide 41331F 6.REMOVE FRONT DIFFERENTIAL SIDE GEAR

a.
C207067

Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front No. 1 differential side gear thrust washers and 2 front differential side gears from the front differential case.

HINT:

While rotating the 2 front differential side gears, remove the 2 front differential pinions and 2 front differential pinion thrust washers.