Home › Drivetrain › EA64F MANUAL TRANSMISSION / TRANSAXLE › SHIFT AND SELECT LEVER SHAFT
RM3090E _52 Drivetrain _008756 EA64F MANUAL TRANSMISSION / TRANSAXLE _0048564 SHIFT AND SELECT LEVER SHAFT A

EA64F MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT LEVER SHAFT  DISASSEMBLY  


PROCEDURE

Hide 33251A 1.REMOVE INNER NO. 1 SHIFT LEVER

a.
C112486

Using a 5 mm pin punch and hammer, remove the slotted spring pin from the inner No. 1 shift lever.


b.
C112482

Remove the inner No. 1 shift lever and shift interlock plate from the shift and select lever shaft.


Hide 33261C 2.REMOVE SHIFT AND SELECT LEVER SHAFT

a.

Remove the control shaft cover and shift and select lever boot from the shift and select lever shaft.


Hide 33266C 3.REMOVE SHIFT GATE PLATE

a.
C116727

Remove the 2 bolts and shift gate plate from the inner No. 1 shift lever.


Hide 33111J 4.REMOVE PIN

a.
C118049

Remove the 2 pins.


Hide 33544C 5.REMOVE SHIFT LEVER DAMPER

a.
C115448

Remove the 2 bolts and shift lever damper from the shift and select lever shaft.


Hide 33528C 6.REMOVE CONTROL SHAFT COVER OIL SEAL

a.
C279714C01
1.781,0.844 2.208,1.563 2.208,1.563 2.563,1.563 false 2.667,1.479 2.979,1.677 0.313,0.198 10 *a
*a Protective Tape


Using a screwdriver, remove the control shaft cover oil seal from the control shaft cover.

NOTICE:

Do not damage the installation surfaces of the control shaft cover.