Home › Drivetrain › K111F MULTIDRIVE / CVT › PARK / NEUTRAL POSITION SWITCH
RM3090E _52 Drivetrain _009408 K111F MULTIDRIVE / CVT _0051021 PARK / NEUTRAL POSITION SWITCH N

K111F MULTIDRIVE / CVT  PARK / NEUTRAL POSITION SWITCH  ADJUSTMENT  


PROCEDURE

Hide 84540 1.ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Move the shift lever to N.


b.
C279311
1.771,0.833 2.406,0.323 2.406,0.323 2.74,0.323 false 0.708,1.417 1.052,1.406 1.052,1.406 1.75,1.125 false 2.792,0.25 3.125,0.646 0.333,0.396 10 *a 0.521,1.333 0.854,1.667 0.333,0.333 10 *b
*a Neutral Basic Line
*b Protrusion


Loosen the 2 bolts of the park/neutral position switch assembly.


c.

Align the protrusion with the neutral basic line.


d.

Hold the switch in that position and tighten the 2 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


e.

After the adjustment, check the operation of the switch.

Click hereDrivetrain>K111F MULTIDRIVE / CVT>PARK / NEUTRAL POSITION SWITCH>ON-VEHICLE INSPECTION