Home › Drivetrain › K111F MULTIDRIVE / CVT › SHIFT LEVER
RM3090E _52 Drivetrain _009408 K111F MULTIDRIVE / CVT _0051023 SHIFT LEVER A

K111F MULTIDRIVE / CVT  SHIFT LEVER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.


·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 58901A 1.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

Hide 2.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C203403

Disconnect the end of the transmission control cable assembly from the shift lever assembly.


c.
C127813C01
1.823,0.656 2.146,0.135 2.146,0.135 2.24,0.135 true 1.385,1.406 1.219,1.74 1.219,1.74 1.094,1.74 true 0.938,1.667 1.104,1.833 0.167,0.167 10 *2 2.281,0.042 2.833,0.229 0.552,0.188 10 *1
*1 Stopper
*2 Nut


Pull out the stopper of the transmission control cable assembly.


d.

Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable assembly from the shift lever assembly.

NOTICE:

Do not over-rotate the nut as it will come off the internal spring and the transmission control cable assembly will not be reusable.



Hide 33560C 3.REMOVE SHIFT LEVER ASSEMBLY

a.

Disconnect the 2 connectors and 4 clamps from the shift lever assembly.

C279459C01
0.375,0.01 0.688,0.167 0.313,0.156 10 *A 3.969,0.021 4.281,0.177 0.313,0.156 10 *B
*A for LHD *B for RHD



b.
C278536

Remove the 4 bolts and shift lever assembly.