Home › Drivetrain › U760F AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION WIRE
RM3090E _52 Drivetrain _008753 U760F AUTOMATIC TRANSMISSION / TRANSAXLE _0051080 TRANSMISSION WIRE A

U760F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION WIRE  INSTALLATION  


PROCEDURE

Hide 82125K 1.INSTALL TRANSMISSION WIRE

a.

Install the transmission wire onto the transmission valve body assembly with the bolt and lock plate.

Torque:
10.8 N*m (110 kgf*cm, 8 ft.*lbf)


b.

Coat the temperature sensor with ATF.


c.

Connect the temperature sensor onto the transmission valve body assembly with the bolt and lock plate.

Torque:
10.8 N*m (110 kgf*cm, 8 ft.*lbf)


d.

Engage the clamp and connect the transmission wire.


e.

Connect the 7 connectors of the shift solenoid valve.


f.

Connect the connector of the transmission revolution sensor.


Hide 35410 2.INSTALL TRANSMISSION VALVE BODY ASSEMBLY