Home › Drivetrain › U760F AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL CASE › 2012.12–2014.10
RM3090E _52 Drivetrain _008753 U760F AUTOMATIC TRANSMISSION / TRANSAXLE _0051092 DIFFERENTIAL CASE A

U760F AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 41221 1.REMOVE FRONT DIFFERENTIAL RING GEAR

a.
C323295C01
1.177,1.594 0.646,1.042 0.646,1.042 1.26,1.531 true 0.427,0.906 0.74,1.104 0.313,0.198 10 false *a
*a Matchmark


Put matchmarks on the front differential ring gear and differential case.


b.
C323296

Remove the 12 bolts.


c.
C323297

Using a plastic-faced hammer, tap on the front differential ring gear to remove it from the differential case.


Hide 41342A 2.REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

a.

Secure the front differential case in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.
C324347

Using a 5 mm pin punch and hammer, remove the front differential pinion shaft straight pin from the differential case.

NOTICE:

Before removing the front differential pinion shaft straight pin, unstake it with a pin punch.



Hide 41342F 3.REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT

a.
C313976

Remove the front No. 1 differential pinion shaft from the differential case.


Hide 4.REMOVE DIFFERENTIAL SIDE GEAR

a.
C278985C01
2.594,0.448 2.927,0.448 false 0.76,0.396 1.094,0.396 false 0.771,0.729 1.104,0.729 false 1.438,1.625 1.771,1.625 false 1.448,1.927 1.781,1.927 false 1.948,0.51 1.813,0.51 1.813,0.51 1.76,0.781 false 0.792,1.583 0.74,1.854 0.74,1.854 0.604,1.854 false 1.188,1 1.521,1 false 1.021,1.385 1.354,1.385 false 3,0.365 3.313,0.521 0.313,0.156 10 false *1 0.583,0.646 0.896,0.802 0.313,0.156 10 false *2 0.573,0.302 0.885,0.458 0.313,0.156 10 false *3 1.406,1.313 1.719,1.469 0.313,0.156 10 false *4 2,0.438 2.313,0.594 0.313,0.156 10 false *5 1.833,1.844 2.146,2 0.313,0.156 10 false *3 1.823,1.542 2.135,1.698 0.313,0.156 10 false *2 0.438,1.771 0.75,1.927 0.313,0.156 10 false *5 1.01,0.927 1.323,1.083 0.313,0.156 10 false *4
*1 Differential Case
*2 Differential Side Gear
*3 No. 1 Front Differential Side Gear Thrust Washer
*4 Front Differential Pinion
*5 Front Differential Pinion Thrust Washer


Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 differential side gears, and 2 No. 1 front differential side gear thrust washers from the differential case.


Hide 31105H 5.REMOVE TRANSAXLE CASE OIL SEAL RH (INNER)

a.
C196917N01
0.472,1.207 0.784,1.369 0.312,0.162 10 SST 0.837,1.287 0.961,1.287 false 2.147,0.331 2.459,0.493 0.312,0.162 10 SST 2.511,0.413 2.573,0.413 2.573,0.413 2.647,0.587 false

Using SST, remove the transaxle case oil seal RH (inner) from the transaxle case.

SST
09308-00010