Home › Drivetrain › U760F AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER
RM3090E _52 Drivetrain _008753 U760F AUTOMATIC TRANSMISSION / TRANSAXLE _0051084 SHIFT LEVER A

U760F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 33563 1.INSTALL SHIFT LOCK RELEASE BUTTON

a.

Attach the 2 claw and install the shift lock release button with spring to the position indicator housing.


Hide 35906 2.INSTALL INDICATOR LIGHT

a.

Using a plastic bag, attach the claw and install the indicator light to the position indicator housing.


Hide 35976 3.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER

a.

Install the No. 2 position indicator slide cover to the position indicator slide cover.


Hide 35975 4.INSTALL POSITION INDICATOR SLIDE COVER

a.

Install the position indicator slide cover to the position indicator housing.


Hide 35952 5.INSTALL POSITION INDICATOR LENS

a.

Attach the 4 claw and install the position indicator lens to the position indicator housing.


Hide 35921 6.INSTALL CONTROL POSITION INDICATOR PLATE

a.

Attach the hook and claw, install the control position indicator plate to the position indicator housing.


Hide 35971E 7.INSTALL POSITION INDICATOR HOUSING

a.

Install the position indicator housing to the rear upper console panel sub-assembly with the 4 screws.


Hide 33502S 8.INSTALL SHIFT LOCK RELEASE BUTTON COVER

a.

Attach the 2 claw and install the shift lock release button cover to the position upper console panel sub-assembly.