CHECK THERMOSTAT (LH Side)
| *A | for Manual Seat |
| *B | for Power Seat |
Check the thermostat in the front seat cushion heater assembly LH.
Remove the front seat cushion heater assembly LH.
for Manual Seat (Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER(for Manual Seat)>REMOVAL)
for Power Seat (Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER(for Power Seat)>REMOVAL)
Remove the front seatback heater assembly LH.
for Manual Seat (Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Manual Seat)>REMOVAL)
for Power Seat (Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Power Seat)>REMOVAL)
Reconnect the connector of the front seat cushion heater assembly LH and the connector of the front seatback heater assembly LH.
Apply battery voltage and check operation of the front seat heater as shown in the table below.
| Connection | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2 |
Front seat heater temperature 42°C (107.6°F) |
| Connection | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2 |
Front seat heater temperature 42°C (107.6°F) |
Immediately after confirming that the seat heater is functioning normally, remove the battery leads. Failing to do so may cause the seat heater to overheat.
CHECK THERMOSTAT (RH Side)
| *A | for Manual Seat |
| *B | for Power Seat |
Check the thermostat in the front seat cushion heater assembly RH.
Remove the front seat cushion heater assembly RH.
for Manual Seat (Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Manual Seat)>REMOVAL)
for Power Seat (Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER(for Power Seat)>REMOVAL)
Remove the front seatback heater assembly RH.
for Manual Seat (Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Manual Seat)>REMOVAL)
for Power Seat (Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Power Seat)>REMOVAL)
Reconnect the connector of the front seat cushion heater assembly RH and the connector of the front seatback heater assembly RH.
Apply battery voltage and check operation of the front seat heater as shown in the table below.
| Connection | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2 |
Front seat heater temperature 42°C (107.6°F) |
| Connection | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2 |
Front seat heater temperature 42°C (107.6°F) |
Immediately after confirming that the seat heater is functioning normally, remove the battery leads. Failing to do so may cause the seat heater to overheat.