Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM3090E _58 Vehicle Interior _008782 DOOR LOCK _0051189 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

B203483
1.781,1.521 1.938,1.667 0.156,0.146 10 *a
*a Component without harness connected
(Unlock Warning Switch Assembly)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Switch free (Key removed) 10 kΩ or higher
1 - 2 Switch pushed (Key set) Below 1 Ω


If the result is not as specified, replace the unlock warning switch assembly.