Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)
RM3090E _58 Vehicle Interior _008782 DOOR LOCK _0051218 WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System) D

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)  DIAGNOSIS SYSTEM  


DESCRIPTION


The ECU stores trouble codes when malfunctions occur.

The diagnostic system allows for reading of the trouble codes from the DLC3.

Use the GTS to help diagnose and repair the problem.



INSPECT BATTERY VOLTAGE


a.

Measure the vehicle battery voltage.

Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery.



SELF-DIAGNOSTIC MODE (USING GTS)


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Entry&Start / Utility / Wireless Door Lock Diagnosis Mode.

Body Electrical > Entry&Start > Utility
Tester Display
Wireless Door Lock Diagnosis Mode
50005 125 2164

e.

Proceed to the next step in accordance with the prompts on the GTS screen.


f.
B220865
0.115,0.135 2.573,0.521 2.458,0.385 10 false Wireless Door Lock Buzzer Output: 0.646,1.396 1,1.604 0.354,0.208 10 false On 0.646,1.677 1.146,1.938 0.5,0.26 10 false Off 1.552,2.167 1.844,2.385 0.292,0.219 10 false T1 2.146,2.167 2.396,2.375 0.25,0.208 10 false T2 1.969,2.583 3.354,3.021 1.385,0.438 10 false T1: 0.125 seconds 1.969,2.896 3.146,3.24 1.177,0.344 10 false T2: 0.5 seconds 1.802,2.167 2.083,2.427 0.281,0.26 10 false T1

Check that the system has switched to self-diagnostic mode by checking the wireless door lock buzzer output pattern.


g.

Check the diagnostic outputs when an electrical key transmitter sub-assembly switch is pressed. The diagnostic outputs can be checked by the interior light and wireless door lock buzzer patterns.

B163380
0.115,0.063 2.75,0.594 2.635,0.531 10 false Wireless Door Lock Buzzer Output: 0.292,1.333 2.365,1.667 2.073,0.333 10 false (Lock/Unlock Switch): 0.458,1.99 1,2.396 0.542,0.406 10 false On 0.469,2.354 1.083,2.708 0.615,0.354 10 false Off 4.323,0.573 7.083,1.125 2.76,0.552 10 false Unmatching Recognition Code (B): 4.208,1.167 4.875,1.531 0.667,0.365 10 false On 4.219,1.552 4.729,1.875 0.51,0.323 10 false Off 4.125,2.927 5.896,3.208 1.771,0.281 10 false No Diagnostic Output (C): 4.177,3.375 4.875,3.844 0.698,0.469 10 false Off 1.25,2.771 1.563,2.99 0.313,0.219 10 false T1 1.771,2.771 2.167,3.031 0.396,0.26 10 false T2 4.938,2.031 6.802,2.49 1.865,0.458 10 false Wave is being received 0.583,3.042 3.75,3.417 3.167,0.375 10 false T1: 0.125 seconds (Wireless Door Lock Buzzer) 0.583,3.406 3.938,3.823 3.354,0.417 10 false T2: 0.25 seconds (Wireless Door Lock Buzzer) 0.292,1.031 1.625,1.292 1.333,0.26 10 false Normal Wave (A)

Result
Wireless Door Lock Buzzer Output Suspected Area
A Normal (No malfunction)
B Register wireless code
C Wave interference or malfunction of a related component