RM3090E
_V1
General
_009232
SPECIFICATIONS
_0050474
2AD-FHV LUBRICATION
F
SPECIFICATIONS 2AD-FHV LUBRICATION SERVICE DATA
ENGINE OIL PRESSURE
| Condition
|
Specified Condition
|
| Idle
|
29 kPa (0.3 kgf/cm2, 4.2 psi) or higher
|
| 4500 rpm
|
245 kPa (2.5 kgf/cm2, 36 psi) or higher
|
STANDARD OIL GRADE
| Oil Grade
|
Oil Viscosity (SAE)
|
| ACEA C2
|
- 0W-30
- 5W-30
|
STANDARD CAPACITY
| Item
|
Specified Condition
|
| Drain and refill without oil filter change
|
5.5 liters (5.8 US qts, 4.8 Imp.qts)
|
| Drain and refill with oil filter change
|
5.9 liters (6.2 US qts, 5.2 Imp.qts)
|
| Dry fill
|
6.3 liters (6.7 US qts, 5.5 Imp.qts)
|
OIL PRESSURE SWITCH
| Tester Connection
|
Condition
|
Specified Condition
|
| 1 - Body ground
|
Engine stopped
|
Below 1 Ω
|
| Engine idling
|
10 kΩ or higher
|
OIL LEVEL SENSOR
| Tester Connection
|
Switch Condition
|
Specified Condition
|
| 1 - 2
|
On
|
Below 0.5 Ω
|
| Off
|
1 MΩ or higher
|
OIL PUMP
| Driven rotor and Drive rotor
|
Standard tip clearance
|
0.180 to 0.300 mm (0.00709 to 0.0118 in.)
|
| Maximum tip clearance
|
0.300 mm (0.0118 in.)
|
| Standard body clearance
|
0.175 to 0.250 mm (0.00689 to 0.00984 in.)
|
| Maximum body clearance
|
0.250 mm (0.00984 in.)
|
| Standard side clearance
|
0.030 to 0.090 mm (0.00118 to 0.00354 in.)
|
| Maximum side clearance
|
0.090 mm (0.00354 in.)
|