| Condition | Specified Condition |
|---|---|
| Idle | 29 kPa (0.3 kgf/cm2, 4.2 psi) or higher |
| 4500 rpm | 245 kPa (2.5 kgf/cm2, 36 psi) or higher |
| Oil Grade | Oil Viscosity (SAE) | |
|---|---|---|
| for CCo
Diesel fuel that contains between 50 ppm and 500 ppm of sulfur |
G-DLD1, ACEA B1, API CF-4 or CF
(You may also use API CE or CD) |
- 5W-30
- 10W-30 - 15W-40 - 20W-50 |
| for CCo
Diesel fuel that contains 50 ppm or less of sulfur |
ACEA C2, ACEA B1, API CF-4 or CF | - 0W-30
- 5W-30 - 10W-30 - 15W-40 - 20W-50 |
| for DPF | ACEA C2 | - 0W-30
- 5W-30 |
| Item | Specified Condition |
|---|---|
| Drain and refill without oil filter change | 5.5 liters (5.8 US qts, 4.8 Imp.qts) |
| Drain and refill with oil filter change | 5.9 liters (6.2 US qts, 5.2 Imp.qts) |
| Dry fill | 6.3 liters (6.7 US qts, 5.5 Imp.qts) |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - Body ground | Engine stopped | Below 1 Ω |
| Engine idling | 10 kΩ or higher |
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 - 2 | On | Below 0.5 Ω |
| Off | 1 MΩ or higher |
| Driven rotor and Drive rotor | Standard tip clearance | 0.180 to 0.300 mm (0.00709 to 0.0118 in.) |
| Maximum tip clearance | 0.300 mm (0.0118 in.) | |
| Standard body clearance | 0.175 to 0.250 mm (0.00689 to 0.00984 in.) | |
| Maximum body clearance | 0.250 mm (0.00984 in.) | |
| Standard side clearance | 0.030 to 0.090 mm (0.00118 to 0.00354 in.) | |
| Maximum side clearance | 0.090 mm (0.00354 in.) |