Home › Engine / Hybrid System › 2AR-FE EMISSION CONTROL › FUEL TANK CAP(w/ Canister Pump Module) › 2012.12–2014.10
RM3090E _51 Engine / Hybrid System _008398 2AR-FE EMISSION CONTROL _0055003 FUEL TANK CAP(w/ Canister Pump Module) G

2AR-FE EMISSION CONTROL  FUEL TANK CAP(w/ Canister Pump Module)  INSPECTION  


PROCEDURE

Hide 77310A 1.INSPECT FUEL TANK CAP ASSEMBLY

a.
A273709C01
2.865,1.667 2.552,1.667 2.552,1.667 2.396,1.271 true 2.896,1.583 3.063,1.771 0.167,0.188 10 *1
*1 Gasket


Visually check that the cap and gasket are not deformed or damaged.

If the result is not as specified, replace the fuel tank cap assembly.

NOTICE:
A266208
1.833,1.76 2.677,1.76 true 2.708,1.677 2.917,1.865 0.208,0.188 10 *1
*1 ID Mark


Confirm that ID mark A is printed on the replacement fuel tank cap.