Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › SIDE AIRBAG SENSOR
RM3090E _58 Vehicle Interior _008786 SUPPLEMENTAL RESTRAINT SYSTEMS _0050507 SIDE AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  SIDE AIRBAG SENSOR  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the side airbag sensors.


PROCEDURE

Hide 89835 1.INSPECT SIDE AIRBAG SENSOR (for Vehicle not Involved in Collision)

Hide 89835 2.INSPECT SIDE AIRBAG SENSOR (Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check the side airbag sensors for defects if a front door panel of the vehicle or the area around a front door panel is damaged.

i.

The defects are as follows:

·

Cracks on the sensor housing

·

Dents on the sensor housing

·

Chips on the sensor housing

·

Cracks or other damage to the connector

·

Damage to the serial number


OK:

No defects are found.


HINT:

If any of the defects is found, replace the center airbag sensor assembly with a new one.




Hide 89835 3.INSPECT SIDE AIRBAG SENSOR (Vehicle Involved in Collision and Airbag is Deployed)

a.

When airbags have deployed as the result of a collision, be sure to replace all side airbag sensors in the damaged areas (anywhere in need of repair).


b.

Visually check the side airbag sensors in undamaged areas for defects.

i.

The defects are as follows:

·

Cracks on the sensor housing

·

Dents on the sensor housing

·

Chips on the sensor housing

·

Cracks or other damage to the connector

·

Damage to the serial number


OK:

No defects are found.


HINT:

If any of the defects is found or a side airbag sensor has detected a major collision, replace the side airbag sensor with a new one.