Home › General › SPECIFICATIONS › 1AD-FTV COOLING › 2012.12–2015.10
RM3090E _V1 General _009232 SPECIFICATIONS _0050401 1AD-FTV COOLING F

SPECIFICATIONS  1AD-FTV COOLING  TORQUE SPECIFICATIONS  


WATER PUMP
Part Tightened N*m kgf*cm ft.*lbf
Water pump assembly x Timing chain cover sub-assembly 22.5 229 17
No. 2 idler pulley sub-assembly x Engine mounting bracket 40 408 30
Engine mounting spacer x Body 95 969 70
Engine mounting insulator sub-assembly RH x Engine mounting bracket x Body 95 969 70
Engine mounting insulator sub-assembly RH x Engine mounting bracket 52 530 38

THERMOSTAT
Part Tightened N*m kgf*cm ft.*lbf
Water inlet x Water inlet housing assembly 11 112 8
No. 4 water by-pass pipe x Water inlet housing assembly 11 112 8

COOLING FAN MOTOR
Part Tightened N*m kgf*cm in.*lbf
Cooling fan motor x Fan shroud 3.9 40 35
No. 2 cooling fan motor x Fan shroud 3.9 40 35
Fan x Cooling fan motor 6.3 64 56
No. 2 fan x No. 2 cooling fan motor 6.3 64 56

RADIATOR
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Fan shroud x Radiator assembly 5.5 56 49
No. 2 air tube x Lower radiator support 31 316 23
No. 2 air tube x Hose clamp 6.5 66 58
No. 2 radiator support x Intercooler assembly 5.5 56 49
Intercooler air hose x Hose clamp 6.5 66 58
Upper radiator support x Radiator support sub-assembly 31 316 23
No. 1 water by-pass hose x Upper radiator support 5.0 51 44
No. 1 radiator support x Upper radiator support 19 194 14
Liquid pipe sub-assembly x Condenser assembly 5.4 55 48
Discharge hose sub-assembly x Condenser assembly 5.4 55 48
Front bumper upper reinforcement sub-assembly x Radiator support sub-assembly 8.0 82 71
Front bumper center stay sub-assembly x Front bumper upper reinforcement sub-assembly x Body 8.0 82 71