Home › Drivetrain › K111F MULTIDRIVE / CVT › COMBINATION SWITCH
RM3090E _52 Drivetrain _009408 K111F MULTIDRIVE / CVT _0057929 COMBINATION SWITCH G

K111F MULTIDRIVE / CVT  COMBINATION SWITCH  INSPECTION  


PROCEDURE

Hide 84970 1.INSPECT COMBINATION SWITCH ASSEMBLY

a.
C277027C03
1.292,1.729 1.5,1.385 true 2.104,1.729 1.865,1.385 true 1.073,1.781 1.688,1.979 0.615,0.198 10 MSW2 1.938,1.781 2.552,1.979 0.615,0.198 10 MSW1 0.104,0.104 0.719,0.302 0.615,0.198 10 *a
*a Component without harness connected
(Combination Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (MSW1) - 4 (MSW2) Combination switch (SPORT) on Below 1 Ω
2 (MSW1) - 4 (MSW2) Combination switch (SPORT) off 10 kΩ or higher


If the result is not as specified, replace the combination switch assembly.