Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH › 2012.12–2016.08
RM3090E _58 Vehicle Interior _008433 SEAT _0058015 SEAT MEMORY SWITCH G

SEAT  SEAT MEMORY SWITCH  INSPECTION  


PROCEDURE

Hide 84927 1.INSPECT SEAT MEMORY SWITCH

a.

Check the resistance.

i.
B341330
1.438,2.531 0.854,2.531 true 1.646,2.583 1.396,3.083 true 1.792,2.583 2,3.083 true 1.969,2.521 2.531,2.521 true 0.552,1.552 0.865,1.708 0.313,0.156 10 *a 2.615,2.427 2.771,2.625 0.156,0.198 10 E 1.906,3.125 2.365,3.323 0.458,0.198 10 MRY 1.271,3.104 1.583,3.302 0.313,0.198 10 M1 0.615,2.427 0.927,2.625 0.313,0.198 10 M2
*a Component without harness connected
(Seat Memory Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (M1) - 1 (E) Memory 1 switch on Below 1 Ω
4 (M2) - 1 (E) Memory 2 switch on Below 1 Ω
2 (MRY) - 1 (E) SET switch on Below 1 Ω


If the result is not as specified, replace the seat memory switch.