Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY(for Dual Type)
RM3090E _58 Vehicle Interior _008786 SUPPLEMENTAL RESTRAINT SYSTEMS _0059592 FRONT PASSENGER AIRBAG ASSEMBLY(for Dual Type) G

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT PASSENGER AIRBAG ASSEMBLY(for Dual Type)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the instrument panel passenger without door airbag assembly.


PROCEDURE

Hide 73960A 1.INSPECT INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


b.

Visually check for defects with the instrument panel passenger without door airbag assembly installed on the vehicle.

i.

The defects are as follows:

·

Cuts on the instrument panel passenger without door airbag assembly

·

Small cracks on the instrument panel passenger without door airbag assembly

·

Significant discoloration on the instrument panel passenger without door airbag assembly


OK:

No defects are found.


HINT:

If any of the defects is found, replace the instrument panel passenger without door airbag assembly with a new one.




Hide 73960A 2.INSPECT INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the instrument panel passenger without door airbag assembly removed from the vehicle.

i.

The defects are as follows:

·

Cuts on the instrument panel passenger without door airbag assembly

·

Small cracks on the instrument panel passenger without door airbag assembly

·

Significant discoloration on the instrument panel passenger without door airbag assembly

·

Cracks or other damage to the connector

·

Deformation or cracks on the instrument panel or instrument panel reinforcement


OK:

No defects are found.


HINT:

If any of the defects is found, replace the instrument panel passenger without door airbag assembly, instrument panel or instrument panel reinforcement with a new one.