Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › SRS SEAT CUSHION AIRBAG ASSEMBLY
RM3090E _58 Vehicle Interior _008786 SUPPLEMENTAL RESTRAINT SYSTEMS _0059593 SRS SEAT CUSHION AIRBAG ASSEMBLY G

SUPPLEMENTAL RESTRAINT SYSTEMS  SRS SEAT CUSHION AIRBAG ASSEMBLY  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the front seat airbag sub-assembly RH.


PROCEDURE

Hide 73905 1.INSPECT FRONT SEAT AIRBAG SUB-ASSEMBLY RH (for Vehicle not Involved in Collision)


b.

Visually check for defects with the front seat airbag sub-assembly RH installed on the vehicle.

i.

The defects are as follows:

·

Cuts on the front seat cushion assembly around the front seat airbag sub-assembly RH

·

Small cracks on the front seat cushion assembly around the front seat airbag sub-assembly RH

·

Significant discoloration on the front seat cushion assembly around the front seat airbag sub-assembly RH


OK:

No defects are found.


HINT:

If any of the defects is found, replace the separate type front seat cushion cover or separate type front seat cushion pad with a new one.




Hide 73905 2.INSPECT FRONT SEAT AIRBAG SUB-ASSEMBLY RH (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the front seat airbag sub-assembly RH removed from the vehicle.

i.

The defects are as follows:

·

Make sure that there are no scratches, broken or frayed threads on the surface of the base fabric of the front seat airbag sub-assembly RH

·

Marks from being dropped

·

Deformation on the installation part of the front seat airbag sub-assembly RH

·

Cracks or other damage to the wire harness or connector


OK:

No defects are found.


HINT:

If any of the defects is found, replace the front seat airbag sub-assembly RH with a new one.