Home › Drivetrain › EB63 MANUAL TRANSMISSION / TRANSAXLE › INPUT SHAFT
RM3090E _52 Drivetrain _009272 EB63 MANUAL TRANSMISSION / TRANSAXLE _0050733 INPUT SHAFT A

EB63 MANUAL TRANSMISSION / TRANSAXLE  INPUT SHAFT  DISASSEMBLY  


PROCEDURE

Hide 1.INSPECT 6TH GEAR THRUST CLEARANCE

Hide 2.INSPECT 5TH GEAR THRUST CLEARANCE

Hide 3.INSPECT 4TH GEAR THRUST CLEARANCE

Hide 4.INSPECT 3RD GEAR THRUST CLEARANCE

Hide 5.INSPECT 6TH GEAR RADIAL CLEARANCE

Hide 6.INSPECT 5TH GEAR RADIAL CLEARANCE

Hide 7.INSPECT 4TH GEAR RADIAL CLEARANCE

Hide 8.INSPECT 3RD GEAR RADIAL CLEARANCE

Hide 33311Y 9.REMOVE REAR INPUT SHAFT BEARING SHAFT SNAP RING

a.
C199078

Using a snap ring expander, remove the rear input shaft bearing shaft snap ring.


Hide 33337 10.REMOVE 6TH GEAR SUB-ASSEMBLY

a.
C278685
0.344,2.635 0.344,2.375 0.344,2.375 0.76,2.375 false 0.479,0.958 0.677,0.958 0.677,0.958 0.677,1.552 false 1.469,0.833 1.781,1.031 0.313,0.198 10 *a 0.063,2 0.375,2.198 0.313,0.198 10 *b 0.229,2.688 0.688,2.885 0.458,0.198 10 SST 0.156,0.875 0.615,1.073 0.458,0.198 10 SST
*a Turn
*b Hold


Using SST, remove the rear input shaft radial ball bearing and 6th gear from the input shaft.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04010, 09954-04010, 09955-04021, 09957-04010, 09958-04011)
09950-60010  (09951-00180, 09951-00320, 09952-06010)


Hide 33337A 11.REMOVE 6TH GEAR NEEDLE ROLLER BEARING

a.
C199080

Remove the 2 pieces of the 6th gear needle roller bearing from the inner 6th gear bearing race.


Hide 33396C 12.REMOVE NO. 5 SYNCHRONIZER RING

a.
C199081

Remove the No. 5 synchronizer ring from the No. 3 transmission clutch hub.


Hide 3335A 13.REMOVE INNER 6TH GEAR BEARING RACE

a.
C199082

Remove the inner 6th gear bearing race from the input shaft.


Hide 3335AA 14.REMOVE INNER 6TH GEAR BEARING RACE LOCK BALL

a.
C202387
2.188,0.198 1.969,0.198 1.969,0.198 1.927,0.885 false 2.271,0.104 2.542,0.281 0.271,0.177 10 *a
*a Magnet Hand


Using a magnet hand, remove the inner 6th gear bearing race lock ball from the input shaft.


Hide 33395 15.REMOVE NO. 3 TRANSMISSION HUB SLEEVE

a.
C202444

Remove the No. 3 transmission hub sleeve from the No. 3 transmission clutch hub.


Hide 33394 16.REMOVE SYNCHROMESH SHIFTING KEY

a.
C199083

Remove the 3 synchromesh shifting keys from the No. 3 transmission clutch hub.


Hide 33336 17.REMOVE 5TH GEAR

a.
C278086
0.573,1.635 1.313,1.635 true 0.781,1.635 0.781,1.76 0.781,1.76 1.281,1.76 true 2,2.333 2.521,2.656 2.521,2.656 2.74,2.656 false 0.25,1.552 0.708,1.75 0.458,0.198 10 false SST 2.802,2.573 3.094,2.74 0.292,0.167 10 false SST

Using SST and a press, press out the No. 3 transmission clutch hub, No. 5 synchronizer ring and 5th gear from the input shaft.

SST
09950-00020  
09950-40011  (09957-04010)
09950-60010  (09951-00180, 09951-00320, 09952-06010)

NOTICE:
·

Do not tighten SST excessively.

·

Support the input shaft by hand to prevent it from falling.




Hide 33336A 18.REMOVE 5TH GEAR NEEDLE ROLLER BEARING

a.
C199085

Remove the 2 pieces of the 5th gear needle roller bearing from the inner 5th gear bearing race.


Hide 33359 19.REMOVE INNER 5TH GEAR BEARING RACE

a.
C199086

Remove the inner 5th gear bearing race from the input shaft.


Hide 33359A 20.REMOVE INNER 5TH GEAR BEARING RACE LOCK BALL

a.
C202445
2.167,0.271 1.938,0.271 false 1.938,0.271 1.854,1.125 false 2.229,0.188 2.448,0.365 0.219,0.177 10 *a
*a Magnet Hand


Using a magnet hand, remove the inner 5th gear bearing race lock ball from the input shaft.


Hide 33334 21.REMOVE 4TH GEAR

a.
C199087

Remove the 4th gear from the input shaft.


b.
C206855

Remove the 4th gear needle roller bearing from the input shaft.


Hide 33368H 22.REMOVE 4TH GEAR SYNCHRONIZER RING

a.
C194243

Remove the No. 4 synchronizer ring from the No. 2 transmission clutch hub.


Hide 33334B 23.REMOVE 4TH GEAR BEARING SPACER

a.
C194244

Remove the 4th gear bearing spacer from the No. 2 transmission clutch hub.


Hide 33364 24.REMOVE NO. 2 TRANSMISSION HUB SLEEVE

a.
C194245

Remove the No. 2 transmission hub sleeve from the No. 2 transmission clutch hub.


Hide 33366 25.REMOVE SYNCHROMESH SHIFTING KEY

a.
C199089

Remove the 3 synchromesh shifting keys from the No. 2 transmission clutch hub.


Hide 33362A 26.REMOVE NO. 2 CLUTCH HUB SETTING SHAFT SNAP RING

a.
C199090

Using a snap ring expander, remove the No. 2 clutch hub setting shaft snap ring.


Hide 33333 27.REMOVE 3RD GEAR

a.
C278688
0.604,1.438 0.604,0.938 0.604,0.938 0.448,0.938 false 1.281,0.063 1.594,0.26 0.313,0.198 10 *a 0.135,1.896 0.448,2.094 0.313,0.198 10 *b 0.125,0.875 0.438,1.073 0.313,0.198 10 SST
*a Turn
*b Hold


Using SST, remove the No. 2 transmission clutch hub, No. 3 synchronizer ring and 3rd gear sub-assembly from the input shaft.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04010, 09954-04020, 09955-04021, 09957-04010, 09958-04011)
09950-60010  (09951-00180, 09951-00320, 09952-06010)


Hide 33333A 28.REMOVE 3RD GEAR NEEDLE ROLLER BEARING

a.
C199092

Remove the 2 pieces of the 3rd gear needle roller bearing from the input shaft.


Hide 33311A 29.REMOVE FRONT INPUT SHAFT BEARING

a.
C199093
2.595,0.838 2.279,0.838 false 2.279,0.838 2.279,1.37 false 2.427,0.838 2.427,1.628 false 2.64,0.763 2.944,0.905 0.304,0.142 10 SST

Using SST and a press, press out the front input shaft bearing from the input shaft.

SST
09527-21011  

NOTICE:

Support the input shaft by hand to prevent it from falling.