RM3090E
_V1
General
_009232
SPECIFICATIONS
_0050418
BRAKE SYSTEM (OTHER)
F
SPECIFICATIONS BRAKE SYSTEM (OTHER) SERVICE DATA
Brake Pedal
| Brake pedal height from floor panel
|
for LHD
|
188.9 to 198.9 mm (7.437 to 7.830 in.)
|
| for RHD
|
182.5 to 192.5 mm (7.185 to 7.578 in.)
|
| Stop light switch clearance
|
0.5 to 2.6 mm (0.0197 to 0.102 in.)
|
| Brake pedal free play
|
1.0 to 6.0 mm (0.0394 to 0.236 in.)
|
| Brake pedal reserve distance from floor panel
|
for LHD
|
More than 95 mm (3.74 in.)
|
| for RHD
|
More than 87 mm (3.43 in.)
|
Brake Master Cylinder (for LHD)
| Brake booster push rod clearance
|
0 mm (0 in.)
|
Brake Master Cylinder (for RHD)
| Brake booster push rod clearance
|
0 mm (0 in.)
|
Vacuum Pump (When Using theEngine Support Bridge for AD Series Engine)
| Standard pressure
|
More than 87 kPa (650 mmHg, 25.6 in.Hg)
|
Vacuum Pump (When Not Using theEngine Support Bridge for AD Series Engine)
| Standard pressure
|
More than 87 kPa (650 mmHg, 25.6 in.Hg)
|
Vacuum Pump (for 3ZR-FAE)
| Standard pressure
|
More than 87 kPa (650 mmHg, 25.6 in.Hg)
|
| Minimum lenght A
|
23.8 mm (0.937 in.)
|
| Minimum lenght B
|
76.0 mm (3.00 in.)
|
Brake Fluid
| SAE J1703 or FMVSS No. 116 DOT 3
|