Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT BUZZER(for LHD) › 2013.11–2015.10
RM3090E _51 Engine / Hybrid System _008749 CRUISE CONTROL _0104316 LANE DEPARTURE ALERT BUZZER(for LHD) G

CRUISE CONTROL  LANE DEPARTURE ALERT BUZZER(for LHD)  INSPECTION  


PROCEDURE

Hide 86652A 1.INSPECT SKID CONTROL BUZZER ASSEMBLY (LANE DEPARTURE ALERT BUZZER)

C147278N01
1.921,1.677 2.057,1.84 0.135,0.163 10 1 2.893,1.677 3.029,1.84 0.135,0.163 10 2 2.287,1.093 2.016,1.63 false 2.575,1.088 2.888,1.647 false

a.

Apply battery voltage to the skid control buzzer assembly (lane departure alert buzzer), and check that the buzzer sounds.

OK
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2 (IG1) Skid control buzzer assembly (lane departure alert buzzer) sounds
Battery negative (-) → Terminal 1 (BZ)

If the result is not as specified, replace the skid control buzzer assembly (lane departure alert buzzer).