Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU) › from 2013.11
RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0103549 PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU) D

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU)  DTC CHECK / CLEAR  


CHECK DTC (USING GTS)


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus:

Chassis / IPA/Parking Assist Monitor / Trouble Codes

Body Electrical / Navigation System / Trouble Codes



e.

Check for DTCs, and then write them down.


f.

Check for DTCs.

Chassis > IPA/Parking Assist Monitor > Trouble Codes
50001 85
Body Electrical > Navigation System > Trouble Codes
50001 212
NOTICE:

The navigation receiver assembly*1 or radio and display receiver assembly*2 outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.

*1: for Navigation Receiver Type

*2: for Radio and Display Type


System Proceed to
Navigation System (for Navigation Receiver Type) (Click here)
Audio and Visual System (for Radio and Display Type) (Click here)




CLEAR DTC (USING GTS)


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus:

Chassis / IPA/Parking Assist Monitor / Trouble Codes

Body Electrical / Navigation System / Trouble Codes



e.

Clear the DTCs.

Chassis > IPA/Parking Assist Monitor > Clear DTCs
50002 85
Body Electrical > Navigation System > Clear DTCs
50002 212


CHECK DTC (USING DIAGNOSTIC MODE)


a.

Refer to navigation system (for Navigation Receiver Type).

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for SD)>DTC CHECK / CLEAR


b.

Refer to audio and visual system (for Radio and Display Type).

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>DTC CHECK / CLEAR



CLEAR DTC (USING DIAGNOSTIC MODE)


a.

Refer to navigation system (for Navigation Receiver Type).

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for SD)>DTC CHECK / CLEAR


b.

Refer to audio and visual system (for Radio and Display Type).

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>DTC CHECK / CLEAR