Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for SD) › 2013.11–2015.10
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0104513 NAVIGATION SYSTEM(for SD) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for SD)  Voice is not Recognized  


PROCEDURE

1.CHECK CONDITION
a.

Check if the system voice recognition success rate is low when recognizing a particular voice.

Result:
Result Proceed to
System voice recognition success rate is low with any voice A
System voice recognition success rate is low only for a particular voice B


HINT:
·

System voice recognition success rate varies depending on voice and pronunciation. This is not a malfunction.

·

When the voice recognition training function is enabled via the vehicle settings, it becomes easier to recognize the particular voice of a user.





A

2.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)

B

CONFIRM VEHICLE SETTINGS (TRAIN VOICE RECOGNITION)

2.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)
a.
E268457

Enter the "Microphone Check" screen. [Refer to Check Mic & Voice Recognition] in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for SD)>OPERATION CHECK


b.

When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.


c.

Push the recording switch and perform voice recording.

·

Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.

·

Voice can be recorded for up to 5 seconds.



d.

Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

OK:

All check results are normal.



Result:
Proceed to
OK
NG



OK

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE