Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for SD) › 2013.11–2016.08
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0104513 NAVIGATION SYSTEM(for SD) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for SD)  Cellular Phone Inspection  


CAUTION / NOTICE / HINT

HINT:

If the operation of a cellular phone or the navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.


PROCEDURE

1.CHECK USAGE CONDITION
a.

Check that the vehicle and cellular phone meet the following conditions:

NOTICE:

If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.

·

The cellular phone is registered as a hands-free device.

·

"Bluetooth" setting of the cellular phone is on.

·

Operating system and software of the cellular phone are the latest versions.

·

There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.




b.

Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

OK:

The cellular phone is connected correctly.



Result:
Proceed to
OK
NG



OK

END (USAGE CONDITIONS DEFECTIVE)

NG

2.RESTART CELLULAR PHONE
2.RESTART CELLULAR PHONE
a.

Restart the cellular phone.


b.

Turn the engine switch off.


c.

Turn the engine switch on (ACC).


d.

Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

OK:

The cellular phone is connected correctly.



Result:
Proceed to
OK
NG



OK

END (TEMPORARY MALFUNCTION WITH "Bluetooth" OF CELLULAR PHONE)

NG

3.CHECK OPERATION
3.CHECK OPERATION
a.

Check if the in-vehicle device can be recognized by the cellular phone.

OK:

In-vehicle device can be recognized



Result:
Proceed to
OK
NG



OK

4.REGISTER AGAIN

NG

5.CHECK USING ANOTHER VEHICLE
4.REGISTER AGAIN
a.

Clear all "Bluetooth" devices registered to the cellular phone and navigation receiver assembly.


b.

Register the cellular phone again.


c.

Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

OK:

The cellular phone is connected correctly.



Result:
Proceed to
OK
NG



OK

END

NG

5.CHECK USING ANOTHER VEHICLE
5.CHECK USING ANOTHER VEHICLE
a.

Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.

HINT:
·

Make sure to obtain the customer's permission to perform this procedure.

·

After the inspection, clear the registered information and usage history acquired during the inspection.



OK:

The cellular phone is connected correctly.



Result:
Proceed to
OK
NG



OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

6.CHECK USING ANOTHER CELLULAR PHONE
6.CHECK USING ANOTHER CELLULAR PHONE
a.

Check if the system functions normally using another "Bluetooth" compatible cellular phone.

HINT:
·

Make sure to obtain the customer's permission to perform this procedure.

·

After the inspection, clear the registered information and usage history acquired during the inspection.



OK:

The cellular phone is connected correctly.



Result:
Proceed to
OK
NG



OK

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE