Home › Drivetrain › EB63 MANUAL TRANSMISSION / TRANSAXLE › DIFFERENTIAL CASE › from 2013.11
RM3090E _52 Drivetrain _009272 EB63 MANUAL TRANSMISSION / TRANSAXLE _0050736 DIFFERENTIAL CASE A

EB63 MANUAL TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 41221 1.REMOVE FRONT DIFFERENTIAL RING GEAR

a.

Mount the front differential ring gear in a vise between aluminum plates.

NOTICE:
·

Be careful not to damage the front differential ring gear.


·

Do not overtighten the vise.




b.
C199116C06
0.625,0.354 1.521,0.354 true 1.521,0.354 1.917,0.677 true 1.521,0.354 1.99,0.531 true 0.406,0.271 0.615,0.479 0.208,0.208 10 false *a
*a Matchmark


Put matchmarks on the front differential ring gear and front differential case sub-assembly.


c.
C199117

Remove the 12 bolts.


d.

Using a plastic-faced hammer, remove the front differential ring gear from the front differential case sub-assembly.


Hide 41302F 2.INSPECT FRONT DIFFERENTIAL CASE SUB-ASSEMBLY

Hide 3.INSPECT FRONT DIFFERENTIAL SIDE GEAR THRUST AMOUNT

Hide 41342A 4.REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

a.

Mount the front differential case sub-assembly in a vise between aluminum plates.

NOTICE:
·

Be careful not to damage the front differential case sub-assembly.


·

Do not overtighten the vise.




b.
C288805

Using a 5 mm pin punch and hammer, remove the front differential pinion shaft straight pin from the front differential case sub-assembly.


Hide 41342F 5.REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT

a.
C200232

Remove the front No. 1 differential pinion shaft from the front differential case sub-assembly.


Hide 6.INSPECT FRONT DIFFERENTIAL PINION BACKLASH

Hide 41039A 7.REMOVE FRONT DIFFERENTIAL SIDE GEAR

a.

Set SST as shown in the illustration and tighten it.

SST
09528-52010  (09953-05010, 09528-05010)

C288037C03
4.448,0.385 4.927,0.385 false 4.844,1.74 4.292,1.625 4.292,1.625 4.833,1.49 true 3.156,0.208 3.552,0.458 0.396,0.25 10 false *a 1.031,2.365 1.427,2.583 0.396,0.219 10 false *b 4.135,0.323 4.646,0.615 0.51,0.292 10 false SST 3.99,1.552 4.5,1.844 0.51,0.292 10 false SST
*a Turn *b Hold


NOTICE:

Do not overtighten SST, as doing so will damage the front differential side gear, center differential side gear conical spring washer, front No. 1 differential side gear thrust washer and front differential case.


HINT:
·

Tighten SST until there is a clearance between the front differential pinions and front differential side gears.

·

When removing the front differential pinions, do not overtighten SST, as it is necessary to rotate the front differential side gears.




b.
C288039C01
2.479,1.198 2.438,0.646 2.438,0.646 2.292,0.646 false 1.552,0.667 1.865,0.865 0.313,0.198 10 false *a 1.917,0.583 2.229,0.781 0.313,0.198 10 true SST
*a Turn


Install SST as shown in the illustration, rotate the front differential side gear, and then remove the 2 front differential pinions and 2 front differential pinion thrust washers from the front differential case sub-assembly.

SST
09528-52010  (09528-05030)

NOTICE:

Do not drop the front differential pinion or front differential pinion thrust washer.



c.
C288038C02
1.885,0.188 2.292,0.188 true 1.833,0.729 2.24,0.729 true 1.906,0.458 2.115,0.458 2.115,0.458 2.323,0.333 true 1.938,1.708 2.313,1.708 true 1.875,1.979 2.01,1.979 2.01,1.979 2.292,1.865 true 1.823,1.323 2.229,1.323 true 1.635,0.667 1.948,0.823 0.313,0.156 10 false *1 1.708,0.396 2.021,0.552 0.313,0.156 10 false *2 1.688,0.125 2,0.281 0.313,0.156 10 false *3 1.615,1.25 1.844,1.438 0.229,0.188 10 true *1 1.75,1.646 2.063,1.802 0.313,0.156 10 false *2 1.688,1.917 2,2.073 0.313,0.156 10 false *3
*1 Front Differential Side Gear
*2 Center Differential Side Gear Conical Spring Washer
*3 Front No. 1 Differential Side Gear Thrust Washer


Remove SST from the front differential case sub-assembly, and then remove the 2 front differential side gears, 2 front No. 1 differential side gear thrust washers and 2 center differential side gear conical spring washers from the front differential case.

NOTICE:

Do not drop the front differential side gear, front No. 1 differential side gear thrust washer and center differential side gear conical spring washer.