Home › Engine / Hybrid System › 3ZR-FAE ENGINE MECHANICAL › CYLINDER HEAD › from 2014.10
RM3090E _51 Engine / Hybrid System _008387 3ZR-FAE ENGINE MECHANICAL _0046813 CYLINDER HEAD A

3ZR-FAE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A329107N01
1.635,0.229 1.771,0.229 1.771,0.229 1.906,0.563 true 1.302,0.146 1.646,0.323 0.344,0.177 10 false SST

Place the cylinder head sub-assembly on wooden blocks.


b.

Using SST, compress the compression spring and remove the valve retainer locks.

SST
09202-70020  
09202-00021  

HINT:

Arrange the removed parts in the correct order.



c.

Remove the retainer, compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A329108N01
0.531,0.135 0.635,0.135 0.635,0.135 0.75,0.365 true 0.208,0.052 0.531,0.24 0.323,0.188 10 false SST

Place the cylinder head sub-assembly on wooden blocks.


b.

Using SST, compress the compression spring and remove the valve retainer locks.

SST
09202-70020  
09202-00021  

HINT:

Arrange the removed parts in the correct order.



c.

Remove the retainer, compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 3.REMOVE VALVE STEM OIL SEAL

a.
A150948

Using needle-nose pliers, remove the valve stem oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A150949

Using compressed air and a magnet hand, remove the valve spring seats by blowing air onto them.


Hide 11117B 5.REMOVE NO. 2 STRAIGHT SCREW PLUG

NOTICE:

If water leaks from the No. 2 straight screw plug or the plug is corroded, replace it.


a.
A150950

Using a 10 mm straight hexagon wrench, remove the 3 No. 2 screw plugs and 3 gaskets.


Hide 6.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.