Home › Engine / Hybrid System › 3ZR-FAE COOLING › THERMOSTAT › from 2015.04
RM3090E _51 Engine / Hybrid System _008391 3ZR-FAE COOLING _0046839 THERMOSTAT G

3ZR-FAE COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 16331A 1.INSPECT THERMOSTAT

HINT:

The valve opening temperature is inscribed on the thermostat.


A313330C02
0.094,0.167 0.406,0.323 0.313,0.156 10 false *a 0.125,2.646 0.438,2.802 0.313,0.156 10 false *b
*a for Type A
*b for Type B


a.

Check that the valve is fully closed when the thermostat is at low temperatures (below 75°C (167°F)).

If it is not fully closed, replace the thermostat.


b.

Immerse the thermostat in water and then gradually heat the water.


c.

Check the valve opening temperature of the thermostat.

Valve opening temperature:

78 to 82°C (172 to 180°F)


If the valve opening temperature is not as specified, replace the thermostat.


d.
A313331C02
0.031,0.031 0.344,0.188 0.313,0.156 10 false *a 0.073,2.552 0.385,2.708 0.313,0.156 10 false *b 2.635,1.625 2.948,1.781 0.313,0.156 10 false *c 2.646,3.802 2.958,3.958 0.313,0.156 10 false *c
*a for Type A
*b for Type B
*c Valve Lift


Check the valve lift.

Standard Valve Lift:
Item Condition Specified Condition
for Type A 93°C (199°F) 10 mm (0.394 in.) or more
for Type B 95°C (203°F) 10 to 14 mm (0.394 to 0.551 in.)


If the valve lift is not as specified, replace the thermostat.