Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › CYLINDER HEAD › from 2015.04
RM3090E _51 Engine / Hybrid System _008396 2AR-FE ENGINE MECHANICAL _0046873 CYLINDER HEAD A

2AR-FE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A337754N01
0.417,0.167 0.583,0.167 0.583,0.167 1.052,0.521 true 2.25,0.167 2.333,0.167 2.333,0.167 2.604,0.229 true 0.104,0.094 0.563,0.292 0.458,0.198 10 false SST 1.958,0.094 2.417,0.292 0.458,0.198 10 false SST

Using SST and wooden blocks, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  09202-00021  


b.

Remove the valve spring retainer, inner compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A337755N01
2.385,0.479 2.5,0.167 2.5,0.167 2.583,0.167 false 0.729,0.292 0.75,1.833 0.75,1.833 0.833,1.833 true 2.615,0.083 3.073,0.281 0.458,0.198 10 false SST 0.854,1.75 1.313,1.948 0.458,0.198 10 false SST

Using SST and wooden blocks, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  09202-00021  


b.

Remove the valve spring retainer, inner compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13711E 3.REMOVE VALVE STEM OIL SEAL

a.
A194958

Using needle-nose pliers, remove the oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A194959

Using compressed air and a magnet hand, remove the valve spring seat by blowing air onto it.


Hide 11117E 5.REMOVE NO. 1 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from a No. 1 screw plug or a plug is corroded, replace it.


A194960

a.

Using a 10 mm hexagon wrench, remove the 3 screw plugs and 3 gaskets.


Hide 11117F 6.REMOVE NO. 2 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from the No. 2 screw plug or the plug is corroded, replace it.


A194961

a.

Using a 14 mm hexagon wrench, remove the screw plug and gasket.


Hide 7.REMOVE CYLINDER HEAD STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.