Home › Drivetrain › K114F MULTIDRIVE / CVT › OIL PAN › from 2015.04
RM3090E _52 Drivetrain _036009 K114F MULTIDRIVE / CVT _0172314 OIL PAN A

K114F MULTIDRIVE / CVT  OIL PAN  REMOVAL  


PROCEDURE

Hide 51410 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 51444A 2.REMOVE REAR ENGINE UNDER COVER LH

Hide 35106L 3.REMOVE TRANSAXLE OIL (CVT) PAN SUB-ASSEMBLY

a.
C295552

Remove the refill plug and gasket from the continuously variable transaxle assembly.


b.
C300644

Using a 10 mm hexagon socket wrench, remove the drain plug and gasket from the transaxle oil (CVT) pan sub-assembly, and drain the fluid.


c.
C300647

Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the transaxle oil (CVT) pan sub-assembly.


d.
C295554C01
2.802,0.5 2.927,0.5 2.927,0.5 2.927,0.635 false 2.635,0.448 2.948,0.646 0.313,0.198 10 false *1
*1 No. 1 Transmission Oil Filler Tube


Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the transaxle oil (CVT) pan sub-assembly.

HINT:

Removing the No. 1 transmission oil filler tube will drain all oil in the transaxle oil (CVT) pan sub-assembly.



e.
C295677

Remove the 19 bolts, transaxle oil (CVT) pan sub-assembly and transaxle oil pan (CVT) gasket from the continuously variable transaxle assembly.

NOTICE:

Some fluid will remain in the transaxle oil (CVT) pan sub-assembly. Remove all the bolts, and carefully remove the transaxle oil (CVT) pan sub-assembly.



f.

Temporarily install the gasket and refill plug to the continuously variable transaxle assembly.

HINT:

Reuse the old gasket as the refill plug will be removed again to adjust the fluid level.



Hide 35394D 4.REMOVE OIL CLEANER (CVT) MAGNET

a.
C295678C02
1.448,0.885 2.26,0.885 false 1.76,1.51 1.76,0.885 false 1.271,0.823 1.583,1.021 0.313,0.198 10 true *1
*1 Oil Cleaner (CVT) Magnet


Remove the 2 oil cleaner (CVT) magnets from the transaxle oil (CVT) pan sub-assembly.


b.

Clean off any metal particles adhered to the 2 oil cleaner (CVT) magnets.


c.

Clean the transaxle oil (CVT) pan sub-assembly and remove any metal particles, sludge, etc.