Home › Drivetrain › K114F MULTIDRIVE / CVT › PARK / NEUTRAL POSITION SWITCH › from 2015.04
RM3090E _52 Drivetrain _036009 K114F MULTIDRIVE / CVT _0172318 PARK / NEUTRAL POSITION SWITCH G

K114F MULTIDRIVE / CVT  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION

a.

Apply the parking brake.


b.

Turn the ignition switch to ON.


c.

Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in any other position.


d.

Check that the back-up light illuminates and the reverse warning buzzer sounds only when the shift lever is in R, but does not function in any other position.

If a malfunction or failure is found, check the park/neutral position switch assembly for continuity.