Home › Drivetrain › K114F MULTIDRIVE / CVT › PARK / NEUTRAL POSITION SWITCH › from 2015.04
RM3090E _52 Drivetrain _036009 K114F MULTIDRIVE / CVT _0172318 PARK / NEUTRAL POSITION SWITCH A

K114F MULTIDRIVE / CVT  PARK / NEUTRAL POSITION SWITCH  REMOVAL  


PROCEDURE

Hide 51410 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 33820B 2.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C300685

Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.


c.

Remove the clip and disconnect the transmission control cable assembly from the No. 1 transmission control cable bracket.


Hide 84540 3.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.
C302120

Disconnect the connector.


b.
C296023

Remove the nut, washer and control shaft lever from the park/neutral position switch assembly.


c.
C296026

Using a screwdriver, pry out the lock plate and remove the lock nut and lock plate from the park/neutral position switch assembly.


d.
C296027

Remove the 2 bolts and park/neutral position switch assembly from the continuously variable transaxle assembly.