Home › Drivetrain › K114F MULTIDRIVE / CVT › SHIFT LEVER › from 2015.04
RM3090E _52 Drivetrain _036009 K114F MULTIDRIVE / CVT _0172320 SHIFT LEVER A

K114F MULTIDRIVE / CVT  SHIFT LEVER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

The procedure listed below is for LHD vehicles.


·

Use the same procedure for RHD and LHD vehicles.



PROCEDURE

Hide 58901A 1.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

Hide 2.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C328346C01
1.896,1.563 2.01,1.438 false
V113147

Disconnect in this Direction


Disconnect the end of the transmission control cable assembly from the shift lever assembly.


c.
C328347C01
1.198,0.906 1.25,0.719 false 1.833,0.667 2.167,0.167 2.167,0.167 2.521,0.167 true 0.906,0.302 1.25,0.302 1.25,0.302 1.49,0.781 true 2.583,0.083 2.896,0.281 0.313,0.198 10 false *1 0.719,0.219 1.031,0.417 0.313,0.198 10 false *2
*1 Stopper
*2 Nut
V113147

Turn in this Direction
V113148

Pull out in this Direction


Pull out the stopper of the transmission control cable assembly.


d.

Turn the nut counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable assembly from the shift lever assembly.

NOTICE:

Do not over-rotate the nut as it will come off the internal spring and the transmission control cable assembly will not be reusable.



Hide 33560C 3.REMOVE SHIFT LEVER ASSEMBLY

a.

Disconnect the 2 connectors and 4 clamps from the shift lever assembly.

C279459C01
0.375,0.01 0.688,0.167 0.313,0.156 10 *A 3.969,0.021 4.281,0.177 0.313,0.156 10 *B
*A for LHD *B for RHD



b.
C278536

Remove the 4 bolts and shift lever assembly.