Home › Engine / Hybrid System › 3ZR-FAE ENGINE CONTROL › AIR FUEL RATIO SENSOR › from 2015.04
RM3090E _51 Engine / Hybrid System _008381 3ZR-FAE ENGINE CONTROL _0046867 AIR FUEL RATIO SENSOR G

3ZR-FAE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
A119369C15
2.458,0.885 2.354,0.885 2.354,0.885 1.948,1.146 false 1.125,0.885 1.24,0.885 1.24,0.885 1.552,1.094 false 1.198,1.771 1.292,1.771 1.292,1.771 1.573,1.583 false 0.844,0.802 1.052,0.969 0.208,0.167 10 +B 2.5,0.802 2.938,0.969 0.438,0.167 10 HA1A 0.74,1.677 1.125,1.844 0.385,0.167 10 A1A- 0.073,0.063 0.25,0.24 0.177,0.177 10 *a
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.