Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER(for 2WW) › from 2015.10
RM3090E _58 Vehicle Interior _008789 HEATING / AIR CONDITIONING _0208272 CONDENSER(for 2WW) G

HEATING / AIR CONDITIONING  CONDENSER(for 2WW)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 88460 1.INSPECT CONDENSER WITH RECEIVER ASSEMBLY

a.

If the fins of the condenser with receiver assembly are dirty, clean them with water and dry with compressed air.

NOTICE:

Do not damage the condenser with receiver assembly.



b.

If any fins of the condenser with receiver assembly are bent, straighten them using a screwdriver or pliers.


Hide 2.INSPECT FOR REFRIGERANT LEAK

a.

Using a halogen leak detector, check pipe joints for refrigerant leaks.


b.

If a refrigerant leak is detected in a joint, check the torque of the joint.