Home › Engine / Hybrid System › 2WW ENGINE CONTROL › ECD SYSTEM › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208480 ECD SYSTEM D

2WW ENGINE CONTROL  ECD SYSTEM  SYSTEM DESCRIPTION  


ENGINE CONTROL SYSTEM


A342489E02
0.51,0.208 2.188,0.458 1.677,0.25 10 false Throttle Position Sensor 0.51,0.833 2.146,1.042 1.635,0.208 10 false Camshaft Position Sensor 0.469,1.51 2.365,1.719 1.896,0.208 10 false Crankshaft Position Sensor 0.646,2.125 2.104,2.354 1.458,0.229 10 false Fuel Pressure Sensor 0.323,2.802 2.458,2.99 2.135,0.188 10 false Turbo Pressure Sensor Assembly 0.198,3.458 2.531,3.708 2.333,0.25 10 false Engine Coolant Temperature Sensor 0.26,4.115 2.521,4.344 2.26,0.229 10 false Accelerator Pedal Position Sensor 0.25,4.813 2.563,5.146 2.313,0.333 10 false Mass Air Flow Meter Sub-assembly 0.365,5.552 2.323,5.781 1.958,0.229 10 false Intake Air Temperature Sensor 0.531,6.25 2.188,6.469 1.656,0.219 10 false Fuel Temperature Sensor 0.344,7.063 2.365,7.292 2.021,0.229 10 false Intake Air Temperature Sensor 0.406,7.969 2.375,8.219 1.969,0.25 10 false Nozzle Vane Position Sensor 3.396,4.281 3.854,4.479 0.458,0.198 10 false ECM 5.094,0.219 6.594,0.51 1.5,0.292 10 false Fuel Injection Control 4.948,0.688 6.563,0.917 1.615,0.229 10 false No. 1 Injector Assembly 4.979,1.177 6.563,1.406 1.583,0.229 10 false No. 2 Injector Assembly 4.979,1.667 6.563,1.875 1.583,0.208 10 false No. 3 Injector Assembly 5.01,2.167 6.646,2.448 1.635,0.281 10 false No. 4 Injector Assembly 5.052,3.031 6.49,3.26 1.438,0.229 10 false Fuel Pressure Control 4.906,3.5 6.656,3.74 1.75,0.24 10 false Fuel Quantity Control Valve 4.948,4.115 6.604,4.344 1.656,0.229 10 false Pressure Discharge Valve 5.156,5 6.417,5.25 1.26,0.25 10 false Fuel Pump Control 5.146,5.438 6.417,5.667 1.271,0.229 10 false FUEL PUMP Relay 5.406,6.073 6.229,6.302 0.823,0.229 10 false Fuel Pump 5.229,6.948 6.542,7.198 1.313,0.25 10 false Glow Plug Control 5.125,7.406 6.5,7.646 1.375,0.24 10 false Glow Plug Controller 5.125,8.073 6.521,8.323 1.396,0.25 10 false Glow Plug Assembly 4.156,7.667 4.615,7.865 0.458,0.198 10 false LIN

A351185E01
0.365,0.146 2.469,0.375 2.104,0.229 10 false Air Fuel Ratio Sensor (Sensor 1) 0.354,0.698 2.396,0.885 2.042,0.188 10 false Air Fuel Ratio Sensor (Sensor 2) 0.583,1.25 2.156,1.49 1.573,0.24 10 false Transponder Key ECU*1 0.354,1.802 2.281,2.167 1.927,0.365 10 false ID Code Box (Immobiliser Code ECU)*2 0.469,2.74 2.281,3 1.813,0.26 10 false Stop Light Switch Assembly 0.406,3.26 2.302,3.521 1.896,0.26 10 false Clutch Start Switch Assembly 0.51,3.823 2.198,4.073 1.688,0.25 10 false Heater Switch Assembly*3 0.708,4.354 1.969,4.604 1.26,0.25 10 false Oil Pressure Switch 0.625,4.917 1.938,5.188 1.313,0.271 10 false Back-up Light Switch 0.521,5.448 2.01,5.708 1.49,0.26 10 false Cruise Control Switch*4 0.396,5.99 2.25,6.25 1.854,0.26 10 false Speed Limiter Main Switch*5 1.021,6.521 2.552,6.719 1.531,0.198 10 false Main Relay 0.885,7.073 1.917,7.281 1.031,0.208 10 false Defroster Relay 0.844,7.604 1.771,7.802 0.927,0.198 10 false Taillight Relay 0.156,8.021 2.135,8.24 1.979,0.219 10 false *1: w/o Entry and Start System 0.167,8.313 2.021,8.604 1.854,0.292 10 false *2: w/ Entry and Start System 0.167,8.594 2.563,8.865 2.396,0.271 10 false *3: w/ Combustion Type Power Heater 3.25,8.063 5.083,8.333 1.833,0.271 10 false *4: w/ Cruise Control System 3.271,8.365 5.031,8.625 1.76,0.26 10 false *5: w/ Speed Limiter Control 5.167,0.156 6.594,0.375 1.427,0.219 10 false Diesel Throttle Control 5.135,0.635 6.51,0.844 1.375,0.208 10 false Throttle Control Motor 5.219,1.365 6.448,1.583 1.229,0.219 10 false Fuel Heater Control 5.396,1.813 6.135,2.021 0.74,0.208 10 false Fuel Heater 5.417,2.521 6.24,2.771 0.823,0.25 10 false Swirl Control 5.563,3 6.792,3.198 1.229,0.198 10 false Actuator 5.167,6.083 6.406,6.281 1.24,0.198 10 false Cooling Fan Control 5.042,6.51 6.573,6.75 1.531,0.24 10 false No. 1 Cooling Fan Relay 5.031,6.99 6.563,7.208 1.531,0.219 10 false No. 2 Cooling Fan Relay 5,7.51 6.521,7.75 1.521,0.24 10 false No. 3 Cooling Fan Relay 5.51,5.375 6.74,5.573 1.229,0.198 10 false Actuator 5.167,4.917 6.521,5.188 1.354,0.271 10 false Turbocharger Control 4.76,3.708 6.917,3.948 2.156,0.24 10 false Exhaust Gas Recirculation Control 5.583,4.167 6.813,4.365 1.229,0.198 10 false Actuator

W126103E04
1.042,0.156 1.792,0.375 0.75,0.219 10 false Battery 0.208,0.823 2.49,1.083 2.281,0.26 10 false No. 1 Cooling Fan Feedback Signal 0.271,1.51 2.5,1.76 2.229,0.25 10 false No. 2 Cooling Fan Feedback Signal 0.896,2.177 1.917,2.396 1.021,0.219 10 false Ignition Signal 5.26,0.146 6.469,0.417 1.208,0.271 10 false Starter Control*1 5.083,0.635 6.625,1.115 1.542,0.479 10 false Certification ECU (Smart Key ECU Assembly) 5.385,1.583 6.427,1.833 1.042,0.25 10 false Starter Relay 3.417,2.302 3.875,2.5 0.458,0.198 10 false ECM 4.292,2.302 4.604,2.5 0.313,0.198 10 false *1 0.927,2.875 1.74,3.094 0.813,0.219 10 false Start Signal 1.104,3.563 1.625,3.802 0.521,0.24 10 false DLC3 4.135,3.979 4.448,4.177 0.313,0.198 10 false *1 4.646,4.219 7.042,4.479 2.396,0.26 10 false Air Conditioning Amplifier Assembly*3 4.76,5.844 6.885,6.229 2.125,0.385 10 false Certification ECU (Smart Key ECU Assembly) 5.896,5.094 6.896,5.385 1,0.292 10 false CAN (V2 Bus) 4.25,5 5.5,5.458 1.25,0.458 10 false CAN (Power Management Bus) 0.406,4.51 2.385,4.75 1.979,0.24 10 false Combination Meter Assembly 0.458,5.417 2.333,5.615 1.875,0.198 10 false Engine Stop and Start ECU 0.771,6.313 2,6.552 1.229,0.24 10 false Skid Control ECU 0.188,6.938 2.573,7.198 2.385,0.26 10 false Air Conditioning Amplifier Assembly*3 0.146,6.74 0.458,6.938 0.313,0.198 10 false *2 3.052,6.802 4.146,7.031 1.094,0.229 10 false CAN (V1 Bus) 0.229,7.802 2.156,8.042 1.927,0.24 10 false *1: w/ Entry and Start System 0.25,8.26 2.354,8.479 2.104,0.219 10 false *2: w/o Entry and Start System 3.167,7.771 5.177,8.01 2.01,0.24 10 false *3: w/ Air Conditioning System

a.

System Control Table

i.

The engine control system of the 2WW engine has the following systems:

System Outline
Fuel Injection Control Based on the signals received from the sensors, the ECM determines the fuel injection volume and fuel injection timing in accordance with the engine condition.
Fuel Pressure Control Based on the signals received from the fuel pressure sensor, the ECM controls fuel pressure using the fuel quantity control valve and pressure discharge valve in accordance with engine operating conditions.
Fuel Pump Control Fuel pump operation is controlled by signals from the ECM in order to feed fuel to the fuel supply pump assembly.
Glow Plug Control
·

The ECM sends signals to the glow plug controller in accordance with engine conditions. Based on the signals, the glow plug controller controls the length of time for which the current is applied to the glow plug assemblies in each cylinder.

·

Detects individual disconnections of circuit wires and short circuits by the use of the glow plug controller.


Diesel Throttle Control
·

Controls the diesel throttle valve opening angle in accordance with the engine condition.

·

Fully closes the diesel throttle valve in order to reduce vibration when the engine is stopped.


Swirl Control Based on the signals received from the sensors, the ECM controls the actuator (for swirl control), in order to open and close the valve.
Turbocharger Control Based on the signals received from the sensors, the ECM controls the actuator in accordance with the engine condition.



b.

Fuel Injection Control

i.

Based on information from various sensors, the ECM determines the injection timing and injection volume according to the engine condition, operates the fuel injectors and controls the fuel injection.

W113859E04
1.677,2.219 2.135,2.417 0.458,0.198 10 false ECM 1.333,5.198 2.677,5.406 1.344,0.208 10 false Injector Assembly 0.198,5.49 2.146,5.719 1.948,0.229 10 false *: w/ Air Conditioning System 4.198,0.354 6.375,0.594 2.177,0.24 10 false Accelerator Pedal Position Sensor 4.188,0.708 5.927,0.948 1.74,0.24 10 false Crankshaft Position Sensor 4.188,1.042 5.938,1.292 1.75,0.25 10 false Camshaft Position Sensor 4.188,1.385 6.5,1.625 2.313,0.24 10 false Engine Coolant Temperature Sensor 4.188,1.74 5.99,1.958 1.802,0.219 10 false Fuel Temperature Sensor 4.198,2.063 6.51,2.323 2.313,0.26 10 false Mass Air Flow Meter Sub-assembly 4.167,2.385 6.188,2.583 2.021,0.198 10 false Intake Air Temperature Sensor 4.177,2.75 6.76,3.25 2.583,0.5 10 false Intake Air Temperature Sensor (built into mass air flow meter sub-assembly) 4.208,3.479 6.479,3.75 2.271,0.271 10 false Turbo Pressure Sensor Assembly 4.219,3.802 5.75,4.042 1.531,0.24 10 false Air Fuel Ratio Sensor 4.208,4.167 5.052,4.385 0.844,0.219 10 false Start Signal 4.219,4.51 5.802,4.771 1.583,0.26 10 false Air Conditioning Signal*


ii.

The types of fuel injection are as follows:

Fuel Injection Type Purpose
Pre-injection Reduces combustion noise by gradually starting fuel combustion for the main injection.
Main Injection Optimizes combustion by using optimal fuel injection.
Post-injection
·

Activates the CCo catalyst.

·

Regenerates the Diesel Particulate Filter (DPF) catalyst.



W112449C01
0.708,0.083 0.885,0.25 0.177,0.167 10 false *a 6.5,3.198 6.677,3.375 0.177,0.177 10 false *b 1.573,3.354 1.781,3.531 0.208,0.177 10 false *c 3.167,3.344 3.479,3.5 0.313,0.156 10 false *d 5.281,3.344 5.594,3.5 0.313,0.156 10 false *e 1.385,1.573 1.542,1.75 0.156,0.177 10 true *f 3.063,1.031 3.229,1.229 0.167,0.198 10 true *g 4.24,0.615 4.406,0.792 0.167,0.177 10 true *h

*a Nozzle Needle Stroke (mm) *b Time (msec.)
*c Pre-injection *d Main Injection
*e Post-injection *f Acoustic Optimization
*g Combustion Optimization *h Exhaust Re-treatment



c.

Fuel Pressure Control

i.

The ECM calculates the target injection pressure based on the signals from the various sensors. To control fuel pressure, signals sent to the fuel quantity control valve of the supply pump assembly regulate the fuel flow volume, and signals sent to the pressure discharge valve of the common-rail regulate the discharge volume, so that the pressure detected by the fuel pressure sensor matches the target injection pressure.

W124800E03
3.844,0.365 5.063,0.604 1.219,0.24 10 false Various Sensors 2.219,1.323 2.677,1.521 0.458,0.198 10 false ECM 2.635,1.698 4.156,2.146 1.521,0.448 10 false Calculation of Target Common-rail Pressure 2.646,3.177 4.135,3.469 1.49,0.292 10 false Fuel Pressure Sensor 0.646,3.833 1.792,4.25 1.146,0.417 10 false Fuel Quantity Control Valve 2.917,3.813 3.969,4.281 1.052,0.469 10 false Common-rail Assembly 5.01,3.833 6.271,4.417 1.26,0.583 10 false Pressure Discharge Valve 3.052,5.135 3.927,5.396 0.875,0.26 10 false Injector



d.

Turbocharger Control

i.

The ECM calculates the optimal nozzle vane position in accordance with the driving conditions (engine speed, injection volume, atmospheric pressure, and engine coolant temperature etc.), and controls the nozzle vane position in accordance with the optimal nozzle vane position and the actual nozzle vane position signal from the nozzle vane position sensor.

W113875E03
0.781,1.375 0.698,1.125 0.698,1.125 0.615,1.125 false 0.917,1.552 1.083,2.052 1.083,2.052 1.167,2.052 false 3.552,0.948 3.75,0.25 3.75,0.25 3.833,0.25 false 0.146,1 0.688,1.75 0.542,0.75 10 false Nozzle Vane Position Sensor 3.917,0.188 6.167,0.417 2.25,0.229 10 false Turbo Pressure Sensor Assembly 1.208,1.969 1.885,2.563 0.677,0.594 10 false Actuator (DC Motor) 5.635,0.719 6.927,1.188 1.292,0.469 10 false Crankshaft Position Sensor 4.688,0.802 5.146,1 0.458,0.198 10 false ECM 5.625,1.49 7.01,2.031 1.385,0.542 10 false Engine Coolant Temperature Sensor 5.646,2.25 7.073,2.708 1.427,0.458 10 false Intake Air Temperature Sensor 4.448,2.229 5.24,2.99 0.792,0.76 10 false Atmospheric Pressure Sensor



e.

Diesel Throttle Control

i.

Diesel throttle control has following functions:

·

A function that closes the diesel throttle valve to reduce vibration and noise when the engine is being stopped.

·

A function that regulates the volume of intake air to maintain the exhaust gas temperature required to regenerate the Diesel Particulate Filter (DPF) catalyst.

·

A function that prevents the engine speed from increasing excessively when combustion materials other than those introduced during normal fuel injection have gotten into the cylinder.*

HINT:

*: For example, if engine oil flows from the turbocharger sub-assembly to the cylinder due to damage to the bearing.





f.

Glow Plug Control

i.

The ECM sends a signal to the glow plug controller, and the glow plug controller independently controls the length of time for which the current is applied to the glow plug assemblies in each cylinder in accordance with engine conditions. By independently and precisely controlling the temperature inside each cylinder, low emissions are achieved.

W128305E02
0.188,2.271 1.604,2.563 1.417,0.292 10 false Glow Plug Assembly 0.552,2.76 0.906,2.99 0.354,0.229 10 false : LIN 0.563,3.115 1.573,3.344 1.01,0.229 10 false : CAN (V1 Bus) 1.708,0.25 2.427,0.854 0.719,0.604 10 false Glow Plug Controller Assembly 2.823,0.219 3.438,0.427 0.615,0.208 10 false Battery 2.448,1.313 3.646,2.094 1.198,0.781 10 false Current Application Request Signal/Diagnostic Signal 4.042,0.135 4.5,0.333 0.458,0.198 10 false ECM 3.813,0.792 4.75,1.219 0.938,0.427 10 false - Fuel Injection Rate 3.833,1.521 4.646,2.198 0.813,0.677 10 false Atmospheric Pressure Sensor 5.229,0.208 6.979,0.479 1.75,0.271 10 false Crankshaft Position Sensor 5.229,0.458 6.896,0.833 1.667,0.375 10 false Intake Air Temperature Sensor 5.25,0.906 7.031,1.396 1.781,0.49 10 false Engine Coolant Temperature Sensor 5.25,1.333 6.885,1.594 1.635,0.26 10 false Vehicle System Voltage 5.229,1.656 6.208,1.896 0.979,0.24 10 false Starter Signal 5.125,1.99 7.063,2.24 1.938,0.25 10 false Combination Meter Assembly 5.146,2.24 6.542,2.479 1.396,0.24 10 false - Glow Indicator Light




EMISSION CONTROL SYSTEM


a.

System Control Table

i.

The emission control system of the 2WW engine has the following systems.

System Description
Exhaust Gas Recirculation (EGR) Control Based on the signals received from the sensors, the ECM determines the EGR volume via the EGR valve and EGR cooler bypass switching valve in accordance with the engine condition.
Diesel Particulate Filter (DPF) Catalyst Regeneration Control The ECM judges the DPF catalyst condition based on signals from the exhaust gas temperature sensor, differential pressure sensor and air fuel ratio sensor to control the diesel throttle control motor and injector assemblies for DPF catalyst regeneration control.
Air Fuel Ratio Sensor Heater Control The ECM controls the air fuel ratio sensor heater according to the engine condition in order to promote the warm-up of the air fuel ratio sensor.



b.

EGR Control

i.

This system is designed to help reduce and control NOx formation due to a peak temperature reduction in the engine combustion chamber, which is accomplished by the introduction of amounts of inert gas into the intake manifold.


ii.

The ECM switches the bypass passage of the EGR cooler assembly via the EGR cooler bypass switching valve assembly in order to optimize the temperature of the EGR gas and clean exhaust gases.

A342491E01
0.563,0.521 0.729,0.354 0.729,0.354 0.813,0.354 false 2.802,1.833 2.885,1.75 2.885,1.75 2.969,1.75 false 2.365,1.594 2.448,1.51 2.448,1.51 2.531,1.51 false 3.604,1.01 3.771,0.927 3.771,0.927 3.854,0.927 false 0.469,0.667 0.385,0.5 0.385,0.5 0.302,0.5 false 1.26,1.135 1.177,0.969 1.177,0.969 1.094,0.969 false 0.5,1.333 0.417,1.167 0.417,1.167 0.333,1.167 false 1.573,0.958 1.49,0.844 1.49,0.844 1.406,0.844 false 1.719,1.302 1.885,1.469 1.885,1.469 1.969,1.469 false 1.323,1.417 1.49,1.583 1.49,1.583 1.573,1.583 false 2.656,2.844 2.74,2.844 2.74,2.844 2.823,2.677 false 1.74,2.844 1.823,2.844 1.823,2.844 1.906,2.677 false 0.833,2.969 0.917,2.969 0.917,2.969 1,2.719 false 0.417,2.938 0.5,2.938 0.5,2.938 0.583,2.688 false 0.375,1.688 0.375,1.354 0.375,1.354 0.292,1.354 false 0.156,0.427 0.333,0.646 0.177,0.219 10 false *1 0.167,1.073 0.344,1.292 0.177,0.219 10 false *2 0.125,1.271 0.302,1.49 0.177,0.219 10 false *3 0.26,2.844 0.438,3.063 0.177,0.219 10 false *4 0.646,2.854 0.823,3.073 0.177,0.219 10 false *5 0.875,0.875 1.135,1.094 0.26,0.219 10 false *11 1.26,0.781 1.479,1 0.219,0.219 10 false *9 1.448,2.813 1.719,3.01 0.271,0.198 10 false *24 1.573,1.521 1.823,1.75 0.25,0.229 10 false *10 2.01,1.375 2.188,1.594 0.177,0.219 10 false *8 2.552,1.406 2.781,1.604 0.229,0.198 10 false *14 3.01,1.667 3.24,1.885 0.229,0.219 10 false *7 2.5,2.792 2.677,3.01 0.177,0.219 10 false *6 3.885,0.833 4.146,1.042 0.26,0.208 10 false *13 0.854,0.281 1.135,0.469 0.281,0.188 10 false *12 4.083,1.25 4.344,1.458 0.26,0.208 10 false *15 6.01,1.594 6.271,1.802 0.26,0.208 10 false *16 6,2.948 6.26,3.156 0.26,0.208 10 false *17 6.875,1.521 7.135,1.729 0.26,0.208 10 false *18 6.875,1.75 7.135,1.958 0.26,0.208 10 false *19 6.885,1.969 7.146,2.177 0.26,0.208 10 false *20 6.885,2.198 7.146,2.406 0.26,0.208 10 false *21 6.885,2.417 7.146,2.625 0.26,0.208 10 false *22 6.885,2.656 7.146,2.865 0.26,0.208 10 false *23

*1 EGR Valve Assembly *2 EGR Valve
*3 Turbocharger Sub-assembly *4 Exhaust Manifold
*5 Engine *6 Throttle Control Motor
*7 Throttle Position Sensor *8 EGR Cooler Bypass Switching Valve
*9 Actuator for EGR Cooler Bypass Switching Valve Assembly *10 EGR Cooler
*11 EGR Cooler Assembly *12 EGR Valve Position Sensor
*13 EGR Cooler Bypass Switching Valve Assembly *14 EGR Gas Temperature Sensor
*15 Vacuum Pump *16 ECM
*17 Atmospheric Pressure Sensor *18 Crankshaft Position Sensor
*19 Accelerator Pedal Position Sensor *20 Engine Coolant Temperature Sensor
*21 Turbo Pressure Sensor Assembly *22 Intake Air Temperature Sensor
*23 Mass Air Flow Meter Sub-assembly *24 Swirl Control Valve
V100135

Exhaust Gas
V100136

Intake Air



c.

Diesel Particulate Filter (DPF) Catalyst Regeneration Control

i.

This control optimally regulates the fuel injection volume, fuel injection timing and opening of the diesel throttle valve in order to burn Particulate Matter (PM) captured in the DPF catalyst.

A342492E01
5.01,2.51 5.094,2.51 5.094,2.51 5.177,2.344 false 5.167,3 5.25,3 5.25,3 5.615,2.74 false 5.333,3.167 5.417,3.167 5.417,3.167 5.625,2.833 false 5.792,3.052 5.875,2.635 5.875,2.635 5.958,2.635 false 6.302,3.063 6.583,2.75 6.583,2.75 6.667,2.75 false 5.385,3.313 5.469,3.313 5.469,3.313 5.635,3.396 false 5.385,3.594 5.469,3.594 5.469,3.594 5.635,3.51 false 5.26,3.865 5.344,3.865 5.344,3.865 5.427,3.781 false 1.125,1.958 1.438,2.156 0.313,0.198 10 false *1 3.083,0.969 3.302,1.177 0.219,0.208 10 false *2 2.927,1.552 3.104,1.76 0.177,0.208 10 false *3 3.125,2.01 3.302,2.219 0.177,0.208 10 false *4 3.583,1.417 3.76,1.625 0.177,0.208 10 false *5 4.219,1.688 4.396,1.896 0.177,0.208 10 false *6 4.896,1.24 5.073,1.448 0.177,0.208 10 false *7 6.083,0.875 6.26,1.083 0.177,0.208 10 false *8 5.99,1.917 6.167,2.125 0.177,0.208 10 false *9 4.781,2.438 5.01,2.635 0.229,0.198 10 false *10 4.938,2.906 5.167,3.104 0.229,0.198 10 false *11 5.104,3.083 5.333,3.281 0.229,0.198 10 false *12 5.156,3.229 5.385,3.427 0.229,0.198 10 false *13 5.167,3.531 5.396,3.729 0.229,0.198 10 false *14 5.021,3.771 5.25,3.969 0.229,0.198 10 false *15 5.958,2.563 6.188,2.76 0.229,0.198 10 false *16 6.719,2.667 6.948,2.865 0.229,0.198 10 false *17

*1 ECM *2 Intake Air Temperature Sensor
*3 Throttle Control Motor *4 Turbo Pressure Sensor Assembly
*5 Throttle Position Sensor *6 Injector Assembly
*7 Intercooler Assembly *8 Mass Air Flow Meter Sub-assembly
*9 Turbocharger Sub-assembly *10 Exhaust Gas Pressure Sensor
*11 Air Fuel Ratio Sensor (for Sensor 1) *12 Exhaust Gas Temperature Sensor (for Sensor 1)
*13 Exhaust Gas Temperature Sensor (for Sensor 2) *14 Air Fuel Ratio Sensor (for Sensor 2)
*15 Differential Pressure Sensor *16 NSR Catalyst
*17 Diesel Particulate Filter (DPF) Catalyst - -


ii.

The ECM judges the DPF catalyst condition based on signals from various sensors. When the ECM determines that PM has accumulated in the DPF catalyst, the ECM activates regeneration control.


iii.

To reduce PM, the ECM controls the injection timing and the injection frequency of the injectors. In addition, the ECM controls the opening of the diesel throttle valve to maintain the exhaust gas temperature required to burn PM.


iv.

At the same time, the filter substrate temperature becomes high and PM reacts with active oxygen and changes into CO2 for purification.




FUEL SYSTEM


a.

Fuel System Description

i.

In this system, the highly pressurized fuel supplied by the fuel supply pump assembly is stored in the common rail assembly, and the ECM sends signals to the injectors in order to control the injection timing and injection volume.

A342493C01
1.188,1.24 1.104,1.073 1.104,1.073 0.938,1.073 false 5.313,3.25 5.479,3.333 5.479,3.333 5.563,3.333 false 3.531,2.823 3.615,2.906 3.615,2.906 3.698,2.906 false 1.635,1.396 1.75,1.26 1.75,1.26 1.833,1.26 false 5.917,0.438 6.083,0.271 6.083,0.271 6.167,0.271 false 3.083,0.427 3.25,0.26 3.25,0.26 3.417,0.26 false 2.469,0.469 2.302,0.302 2.302,0.302 2.135,0.302 false 1.688,0.875 1.604,0.708 1.604,0.708 1.521,0.708 false 2.521,2.365 2.604,2.365 2.604,2.365 2.688,2.198 false 0.771,0.969 0.969,1.188 0.198,0.219 10 false *3 1.885,1.177 2.083,1.396 0.198,0.219 10 false *4 1.896,0.219 2.167,0.448 0.271,0.229 10 false *13 3.469,0.198 3.667,0.417 0.198,0.219 10 false *1 6.208,0.208 6.406,0.427 0.198,0.219 10 false *2 2.927,1.792 3.125,2.01 0.198,0.219 10 false *5 2.75,2.51 2.948,2.729 0.198,0.219 10 false *6 2.792,3.938 2.99,4.156 0.198,0.219 10 false *8 2.406,3.781 2.604,4 0.198,0.219 10 false *7 4.781,3.885 5.01,4.104 0.229,0.219 10 false *10 6.229,4.271 6.479,4.49 0.25,0.219 10 false *12 5.625,3.26 5.823,3.479 0.198,0.219 10 false *9 3.688,2.844 3.885,3.063 0.198,0.219 10 false *b 2.344,2.271 2.542,2.49 0.198,0.219 10 false *a 1.344,0.625 1.542,0.844 0.198,0.219 10 false *c 6.25,3.719 6.469,3.927 0.219,0.208 10 false *11

*1 Common Rail Assembly *2 Fuel Pressure Sensor
*3 Fuel Supply Pump Assembly *4 Fuel Quantity Control Valve
*5 Fuel Temperature Sensor *6 Fuel Filter Assembly
·

Fuel Heater


*7 Fuel Tank Assembly *8 Fuel Suction Tube with Pump and Gauge Assembly
·

Fuel Pump


*9 Injector Assembly *10 ECM
*11 Crankshaft Position Sensor (NE Signal) *12 Camshaft Position Sensor (G Signal)
*13 Pressure Discharge Valve - -
*a Fuel (Low Pressure) *b Fuel (Return)
*c Fuel (High Pressure) - -



b.

Fuel Supply Pump Assembly

i.

The fuel fed from the fuel pump flows to the camshaft space. The fuel lubricates the fuel supply pump assembly through the bearing bush and returns to the fuel tank. In addition, excess fuel returns from the fuel over flow valve to the fuel tank.


ii.

The fuel in the camshaft space flows to the flow control valve in the fuel quantity control valve. The flow rate of the fuel which passes through the flow control valve is controlled and the fuel flows to the valve plate.


iii.

When the camshaft rotates and the plunger is pushed down due to the force of the tappet spring, the check valve is pushed down due to the fuel applied against the check valve spring or pulled down due to the downward movement of the plunger. As a result, the fuel can flow into the cylinder.


iv.

When the camshaft rotates further and the cam pushes up the plunger via the roller and tappet, the check valve closes and the fuel pressure in the cylinder increases. When the force of the fuel pressure in the cylinder becomes higher than the combined force of the fuel pressure of the common rail assembly and the force of the check ball spring in the fuel supply pump assembly, the fuel pushes open the check ball and flows to the common rail assembly.


v.

The ECM controls the opening of the flow control valve in the fuel quantity control valve in order to regulate the volume of fuel that is pumped by the supply pump assembly to the common rail assembly. Consequently, the fuel pressure in the common rail assembly is controlled to the target injection pressure.

W113880E01
1.25,1.083 1,0.917 1,0.917 0.833,0.917 false 2,1.104 1.583,0.583 1.583,0.583 1.5,0.583 false 2.094,1.042 1.677,0.375 1.677,0.375 1.594,0.375 false 1.448,1.813 1.031,1.563 1.031,1.563 0.865,1.563 false 0.917,2.167 1.083,2.167 1.083,2.167 1.917,1.917 false 0.833,2.333 1,2.333 1,2.333 2.083,2 false 0.833,2.5 0.917,2.5 0.917,2.5 1.938,2.438 false 0.792,2.688 0.958,2.688 0.958,2.688 1.792,2.688 false 2.167,4.281 2.083,4.281 2.083,4.281 2.083,3.531 false 0.563,3.333 0.479,3.333 0.479,3.333 0.396,3.167 false 1.448,4.333 1.531,4.333 1.531,4.333 1.948,3.406 false 3.25,3.25 3.083,3.25 3.083,3.25 2.167,2.583 false 3.146,2.594 3.063,2.594 3.063,2.594 2.563,2.344 false 3.167,2.333 3.083,2.333 3.083,2.333 2.542,2.094 false 3.24,2 3.156,2 3.156,2 2.865,1.76 false 3.271,1.479 3.104,1.479 3.104,1.479 2.688,1.729 false 3.333,1.125 3.25,1.125 3.25,1.125 2.917,1.292 false 2.854,1.021 2.771,1.021 2.771,1.021 2.521,1.271 false 2.656,0.792 2.573,0.792 2.573,0.792 2.406,1.292 false 2.479,0.5 2.396,0.5 2.396,0.5 2.146,0.917 false 6.156,1.042 6.156,1.375 6.156,1.375 6.24,1.375 false 5.208,1.281 5.292,1.281 5.292,1.281 5.292,1.031 false 4.552,0.917 4.635,0.917 4.635,0.917 4.802,0.667 false 0.24,0.177 0.552,0.375 0.313,0.198 10 false *1 0.677,0.823 0.875,1.021 0.198,0.198 10 false *2 0.708,1.479 0.906,1.677 0.198,0.198 10 false *3 0.76,2.042 0.958,2.24 0.198,0.198 10 false *4 0.698,2.208 0.896,2.406 0.198,0.198 10 false *5 0.656,2.417 0.854,2.615 0.198,0.198 10 false *6 0.646,2.604 0.844,2.802 0.198,0.198 10 false *a 0.604,3.271 0.802,3.469 0.198,0.198 10 false *7 0.896,3.542 1.094,3.74 0.198,0.198 10 false *b 1.25,4.24 1.448,4.438 0.198,0.198 10 false *8 3.302,3.198 3.5,3.396 0.198,0.198 10 false *9 3.177,2.521 3.427,2.708 0.25,0.188 10 false *10 3.208,2.24 3.448,2.438 0.24,0.198 10 false *11 3.302,1.917 3.5,2.115 0.198,0.198 10 false *c 3.302,1.417 3.5,1.615 0.198,0.198 10 false *d 3.375,1.063 3.573,1.26 0.198,0.198 10 false *e 2.865,0.906 3.104,1.073 0.24,0.167 10 false *12 2.688,0.719 2.938,0.896 0.25,0.177 10 false *13 2.521,0.396 2.781,0.604 0.26,0.208 10 false *14 1.375,0.281 1.594,0.479 0.219,0.198 10 false *15 1.271,0.49 1.521,0.688 0.25,0.198 10 false *16 4.375,0.823 4.573,1.021 0.198,0.198 10 false *2 4.979,1.198 5.24,1.396 0.26,0.198 10 false *15 6.323,1.302 6.583,1.5 0.26,0.198 10 false *13 2.229,4.208 2.427,4.406 0.198,0.198 10 false *a 4.344,0.198 4.542,0.396 0.198,0.198 10 false *i 5.74,0.406 6.052,0.604 0.313,0.198 10 false *17 6.531,0.958 6.729,1.156 0.198,0.198 10 false *e 5.729,2.656 6.042,2.854 0.313,0.198 10 false *17 4.365,2.5 4.563,2.698 0.198,0.198 10 false *j 3.417,3.833 3.729,4.021 0.313,0.188 10 false : *f 3.417,4.052 3.729,4.24 0.313,0.188 10 false : *g 3.417,4.281 3.729,4.469 0.313,0.188 10 false : *h

*1 Fuel Supply Pump Assembly *2 Fuel Quantity Control Valve
*3 Flow Control Valve *4 Tappet Spring
*5 Plunger *6 Tappet
*7 Camshaft *8 Double Cam
*9 Roller *10 Fuel Over Flow Valve
*11 Fuel Over Flow Valve Spring *12 Check Ball Spring
*13 Check Ball *14 Check Valve Spring
*15 Check Valve *16 Valve Plate
*17 ECM - -
*a Camshaft Space *b Bearing Bush
*c Fuel Inlet Port (from Fuel Pump Assembly) *d Fuel Return Port (to Fuel Tank Assembly)
*e To Common Rail Assembly *f Return Fuel
*g Fuel Feed *h High Pressure Fuel
*i Plunger Moved from BDC to TDC *j Plunger Moved from TDC to BDC


vi.

When the opening of the flow control valve in the fuel quantity control valve is small, the fuel flow area is kept small, which decreases the transferable fuel quantity.


vii.

Even when the plunger strokes fully, the flow volume continues to be small due to the small flow area.


viii.

Pumping will start when the fuel pressure has become higher than the total power of the common rail assembly pressure and the check ball spring force.

W113876E01
0.302,0.75 0.385,0.75 0.385,0.75 0.385,0.417 false 0.146,0.656 0.375,0.875 0.229,0.219 10 false *a

*a Small Flow Area - -


ix.

When the opening of the flow control valve in the fuel quantity control valve is large, the fuel flow area is kept large, which increases the transferable fuel quantity.


x.

If the plunger strokes fully, the flow volume will increase because the flow area is large.


xi.

Pumping will start when the fuel pressure has become higher than the total power of the common rail assembly pressure and the check ball spring force.

W113877E01
0.302,0.76 0.385,0.76 0.385,0.76 0.385,0.427 false 0.135,0.656 0.344,0.865 0.208,0.208 10 false *a

*a Large Flow Area - -



c.

Injector Assembly

i.

When electrical current is applied to the solenoid coil, it pulls the solenoid valve up.


ii.

The orifice of the control chamber opens, allowing the fuel to flow out.


iii.

The fuel pressure in the control chamber decreases.


iv.

Simultaneously, fuel flows from the orifice to the bottom of the piston and raises the piston up (to enhance response).


v.

As a result, the piston raises the nozzle needle to inject fuel.


vi.

When the electrical current applied to the solenoid coil is stopped, the solenoid valve is pushed down and the orifice of the control chamber is closed.


vii.

The fuel pressure in the control chamber increases.


viii.

As a result, the piston and the nozzle needle are pushed down and fuel injection stops.

W113878E01
2.365,1.719 2.948,1.719 false 1.344,1.042 2.01,1.042 false 1.365,2 2.115,2 false 1.26,1.25 2.01,1.25 false 1.375,2.583 2.125,2.583 false 1.771,0.833 1.604,0.667 1.604,0.667 1.438,0.667 false 2.24,1.458 2.917,1.167 2.917,1.167 3.167,1.167 false 5.052,1.521 5.635,1.688 5.635,1.688 5.802,1.688 false 1.271,0.573 1.51,0.792 0.24,0.219 10 false *1 1.188,0.958 1.427,1.177 0.24,0.219 10 false *2 1.104,1.177 1.344,1.396 0.24,0.219 10 false *3 1.219,1.917 1.458,2.135 0.24,0.219 10 false *4 1.208,2.5 1.448,2.719 0.24,0.219 10 false *5 3.198,1.063 3.438,1.281 0.24,0.219 10 false *6 1.177,1.635 1.417,1.854 0.24,0.219 10 false *a 2.99,1.635 3.229,1.854 0.24,0.219 10 false *b 5.833,1.604 6.073,1.823 0.24,0.219 10 false *c 4.99,0.323 5.229,0.542 0.24,0.219 10 false *d 3.99,1.625 4.229,1.844 0.24,0.219 10 false *a

*1 Injector Assembly *2 Solenoid Coil
*3 Solenoid Valve *4 Piston
*5 Nozzle Needle *6 Check Ball
*a Fuel (from Common Rail Assembly) *b Control Chamber
*c Orifice *d Fuel (Return)