Home › Engine / Hybrid System › 2WW ENGINE CONTROL › DIESEL THROTTLE BODY › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208481 DIESEL THROTTLE BODY G

2WW ENGINE CONTROL  DIESEL THROTTLE BODY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT DIESEL THROTTLE BODY ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Actuator Test of Throttle Valve / Data List / Throttle Valve Actuator Position.

Powertrain > Engine and ECT > Active Test
Active Test Display
Actuator Test of Throttle Valve
Data List Display
Throttle Valve Actuator Position
50004 371 6 103

e.

Perform the following steps to determine if the diesel throttle body assembly is normal.


f.

Perform the Active Test and set it to 5% according to the display on the GTS.

OK:

The throttle valve operates within 1 second and the difference between the Active Test setting and the value of Throttle Valve Actuator Position is +/-3%.



g.

Wait for 2 seconds or more.


h.

Perform the Active Test and set it to 91% according to the display on the GTS.

OK:

The throttle valve operates within 1 second and the difference between the Active Test setting and the value of Throttle Valve Actuator Position is +/-3%.