Home › Engine / Hybrid System › 2WW ENGINE CONTROL › MASS AIR FLOW METER › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208484 MASS AIR FLOW METER A

2WW ENGINE CONTROL  MASS AIR FLOW METER  REMOVAL  


PROCEDURE

Hide 22204 1.REMOVE MASS AIR FLOW METER SUB-ASSEMBLY

a.
A315737

Disconnect the mass air flow meter sub-assembly connector.


b.

Using a T20 "TORX" socket wrench, remove the 2 screws and mass air flow meter sub-assembly from the air cleaner cap sub-assembly.

NOTICE:

Avoid physical shock to the mass air flow meter sub-assembly.