Home › Engine / Hybrid System › 2WW ENGINE CONTROL › CRANKSHAFT POSITION SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208486 CRANKSHAFT POSITION SENSOR A

2WW ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CRANKSHAFT POSITION SENSOR

a.

Connect the crankshaft position sensor connector.


b.

Using a T25 "TORX" socket wrench, install the crankshaft position sensor with the bolt.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

NOTICE:

Avoid physical shock to the crankshaft position sensor.



Hide 17410 2.INSTALL FRONT EXHAUST PIPE ASSEMBLY