Home › Engine / Hybrid System › 2WW ENGINE CONTROL › INTAKE AIR TEMPERATURE SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044372 2WW ENGINE CONTROL _0208488 INTAKE AIR TEMPERATURE SENSOR G

2WW ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT INTAKE AIR TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2673 to 2955 Ω
60°C (140°F) 532 to 588 Ω


If the result is not as specified, replace the intake air temperature sensor.