Home › Engine / Hybrid System › 2WW EMISSION CONTROL › EGR GAS TEMPERATURE SENSOR › from 2015.10
RM3090E _51 Engine / Hybrid System _044375 2WW EMISSION CONTROL _0210864 EGR GAS TEMPERATURE SENSOR G

2WW EMISSION CONTROL  EGR GAS TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT EGR GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 15.4 to 26.0 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the EGR gas temperature sensor.


If the result is not as specified, replace the EGR gas temperature sensor.